Air Valve Leak

[cmillsap]

(06-07-2013 16:56)pgchin Wrote:  

(06-07-2013 16:32)cmillsap Wrote:  Pete,

They just ordered the Chelsea Part number: 328591-129X, which will arive Tuesday. they have not been able to find the 1"-15T Quality Control Corp Pump (CPC 1049 CPC 030-R-2-AF-BC) yet and I did advise him to look at Williams & Williams. I hope I don't have to wait 3 weeks to get one.

Unless I misunderstand, those are the only two items needed to make this changeover??

Hi Chuck,
Yes, you will need two hydraulic hoses , one for the PTO, and one for wet spline kit and a hose "tee". You can order them from Chelsea or have them made up locally at a hydraulics store. The old one from the PTO can be used as a model for your new one. As for the 3 weeks wait, yeah, unfortunately unless they find someone who stocks one, the build and ship time is about 3 weeks for the pump........... I hope they find one for you!
PS Plus the 3 filters for the hydraulic tank(wix #57317) and 5 gallons of aw32 or Rando 32. :-)

Pete,

Thanks again about the hoses and filters, I spoke to the factory on the pump. Cost is $1347.31 and ship date is next Friday.

---

(06-07-2013 17:00)al perna Wrote:  Chuck , I did not see this post till now but today at Parliament I had my PTO pump lubed. It only needed 1/2 a tube . Johnnie went on to say I was lucky cause that job is around a 10 hr in and out .

we all hope it is less for you but it is good to know worst case scenario .

Thanks, Al,

Yeah, I had Johnney inspect and lube the PTO before I bought the coach. Hesaid it was in good shape at that point in time. However, the mechanics at my repair shop is telling me it is abnormally noisy with a small seal leak and should be looked at. Maybe the 3000 miles I put on it between FL and CA done the PTO in.