Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hitch Camera
10-09-2009, 16:01
Post: #1
Hitch Camera
The 'Bird "Hitch Camera" installation was completed today except for the final location/mounting of the Monitor. All is working great. This is a John Finn addition to his coach and copied for our coach and our Dodge Ram 3500 too. The additional Transmitter cable length allowed for locating the Transmitter to the bed pedestal front...could move it forward of that location but not needed.


Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Quote this message in a reply
10-09-2009, 17:01
Post: #2
Hitch Camera
that is a great addition. I always have to hook up the trailer behind the coach by myself. Brenda is working paying for all this. And to not havve to get out of the coach to see if I'm close would be great- and since the camera is small- people will wonder- "how did he do that"?


Ernie Ekberg
83PT40
Wanderlodge
Weatherford, Tx 817-475-3991

--- On Fri, 10/9/09, Curt Sprenger wrote:

From: Curt Sprenger
Subject: [WanderlodgeForum] Hitch Camera
To: "WanderlodgeForum"
Date: Friday, October 9, 2009, 11:01 PM


The 'Bird "Hitch Camera" installation was completed today except for the final location/mounting of the Monitor. All is working great. This is a John Finn addition to his coach and copied for our coach and our Dodge Ram 3500 too. The additional Transmitter cable length allowed for locating the Transmitter to the bed pedestal front...could move it forward of that location but not needed.


Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA


Quote this message in a reply
10-10-2009, 03:00
Post: #3
Hitch Camera
Curt,

Which camera did you use? Sounds like the transmitter works fine from the bed
but I didn't think the reception would be that good.

Jerry
85 PT40

--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
Quote this message in a reply
10-10-2009, 03:17
Post: #4
Hitch Camera
Link to camera/monitor.


http://www.y2incusa.com/safetyview7inwir...ystem.aspx

Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA




On Sat, Oct 10, 2009 at 8:00 AM, jburgessx2 <"jburgessx2@yahoo.com"> wrote:
 


Curt,



Which camera did you use? Sounds like the transmitter works fine from the bed but I didn't think the reception would be that good.



Jerry

85 PT40




--- In "WanderlodgeForum%40yahoogroups.com", Curt Sprenger wrote:

>

> The 'Bird "Hitch Camera" installation was completed today except for the

> final location/mounting of the Monitor. All is working great. This is a John

> Finn addition to his coach and copied for our coach and our Dodge Ram 3500

> too. The additional Transmitter cable length allowed for locating the

> Transmitter to the bed pedestal front...could move it forward of that

> location but not needed.

>

>

> Curt Sprenger

> 1987 PT38 8V92 "MacAttack Racing"

> Anaheim Hills, CA

>



Quote this message in a reply
10-10-2009, 04:10
Post: #5
Hitch Camera
It would be great to look at and listen remotely from the driver seat of the
toad, while en-route. noise is a big clue and steering wheel tracking and
vibrations a bigger clue.

I wouldn't mount them permanently and only set up docking so yu can change the
camera location. it may even work to use it as a tool to view hard to see engine
parts and down wall angles.


Greg

--- In WanderlodgeForum@yahoogroups.com, Curt Sprenger wrote:
>
> Link to camera/monitor.
>
>
> http://www.y2incusa.com/safetyview7inwir...ystem.aspx
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
>
>
> On Sat, Oct 10, 2009 at 8:00 AM, jburgessx2 wrote:
>
> >
> >
> > Curt,
> >
> > Which camera did you use? Sounds like the transmitter works fine from the
> > bed but I didn't think the reception would be that good.
> >
> > Jerry
> > 85 PT40
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com,
> > Curt Sprenger wrote:
> > >
> > > The 'Bird "Hitch Camera" installation was completed today except for the
> > > final location/mounting of the Monitor. All is working great. This is a
> > John
> > > Finn addition to his coach and copied for our coach and our Dodge Ram
> > 3500
> > > too. The additional Transmitter cable length allowed for locating the
> > > Transmitter to the bed pedestal front...could move it forward of that
> > > location but not needed.
> > >
> > >
> > > Curt Sprenger
> > > 1987 PT38 8V92 "MacAttack Racing"
> > > Anaheim Hills, CA
> > >
> >
> >
> >
>
Quote this message in a reply
10-10-2009, 09:39
Post: #6
Hitch Camera

I have seen these at various places. While I don't expect HD Quality, how good is the video?
thanks
John
----- Original Message -----
From: "jburgessx2@yahoo.com"
To: "WanderlodgeForum@yahoogroups.com"
Sent: Saturday, October 10, 2009 08:00
Subject: [WanderlodgeForum] Re: Hitch Camera


Curt,

Which camera did you use? Sounds like the transmitter works fine from the bed but I didn't think the reception would be that good.

Jerry
85 PT40

--- In "WanderlodgeForum@yahoogroups.com", Curt Sprenger ...> wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>

Quote this message in a reply
10-10-2009, 12:36
Post: #7
Hitch Camera
John,
The Video is very good, much better than I expected for a cheap system. And more than good enough for backing up to a trailer.

Curt Sprenger

1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA




On Sat, Oct 10, 2009 at 2:39 PM, John <"jc_oop@sbcglobal.net"> wrote:
 



I have seen these at various places.   While I don't expect HD Quality, how good is the video? 
 
thanks
John
 
----- Original Message -----
From: "jburgessx2@yahoo.com"
To: "WanderlodgeForum@yahoogroups.com"
Sent: Saturday, October 10, 2009 08:00
Subject: [WanderlodgeForum] Re: Hitch Camera
 


Curt,

Which camera did you use? Sounds like the transmitter works fine from the bed but I didn't think the reception would be that good.

Jerry
85 PT40

--- In "WanderlodgeForum@yahoogroups.com", Curt Sprenger wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>

Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)