The 'Bird "Hitch Camera" installation was completed today except for the final location/mounting of the Monitor. All is working great. This is a John Finn addition to his coach and copied for our coach and our Dodge Ram 3500 too. The additional Transmitter cable length allowed for locating the Transmitter to the bed pedestal front...could move it forward of that location but not needed.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Curt,
Which camera did you use? Sounds like the transmitter works fine from the bed
but I didn't think the reception would be that good.
Jerry
85 PT40
--- In
WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
Link to camera/monitor.
http://www.y2incusa.com/safetyview7inwir...ystem.aspx
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
On Sat, Oct 10, 2009 at 8:00 AM, jburgessx2
<"jburgessx2@yahoo.com"> wrote:
ÃÂ
Curt,
Which camera did you use? Sounds like the transmitter works fine from the bed but I didn't think the reception would be that good.
Jerry
85 PT40
--- In "WanderlodgeForum%40yahoogroups.com", Curt Sprenger wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
It would be great to look at and listen remotely from the driver seat of the
toad, while en-route. noise is a big clue and steering wheel tracking and
vibrations a bigger clue.
I wouldn't mount them permanently and only set up docking so yu can change the
camera location. it may even work to use it as a tool to view hard to see engine
parts and down wall angles.
Greg
--- In
WanderlodgeForum@yahoogroups.com, Curt Sprenger
wrote:
>
> Link to camera/monitor.
>
>
> http://www.y2incusa.com/safetyview7inwir...ystem.aspx
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
>
>
> On Sat, Oct 10, 2009 at 8:00 AM, jburgessx2 wrote:
>
> >
> >
> > Curt,
> >
> > Which camera did you use? Sounds like the transmitter works fine from the
> > bed but I didn't think the reception would be that good.
> >
> > Jerry
> > 85 PT40
> >
> >
> > --- In WanderlodgeForum@yahoogroups.com,
> > Curt Sprenger wrote:
> > >
> > > The 'Bird "Hitch Camera" installation was completed today except for the
> > > final location/mounting of the Monitor. All is working great. This is a
> > John
> > > Finn addition to his coach and copied for our coach and our Dodge Ram
> > 3500
> > > too. The additional Transmitter cable length allowed for locating the
> > > Transmitter to the bed pedestal front...could move it forward of that
> > > location but not needed.
> > >
> > >
> > > Curt Sprenger
> > > 1987 PT38 8V92 "MacAttack Racing"
> > > Anaheim Hills, CA
> > >
> >
> >
> >
>
I have seen these at various places. While I don't expect HD Quality, how good is the video?
thanks
John
----- Original Message -----
From: "jburgessx2@yahoo.com"
To: "WanderlodgeForum@yahoogroups.com"
Sent: Saturday, October 10, 2009 08:00
Subject: [WanderlodgeForum] Re: Hitch Camera
Curt,
Which camera did you use? Sounds like the transmitter works fine from the bed but I didn't think the reception would be that good.
Jerry
85 PT40
--- In "WanderlodgeForum@yahoogroups.com", Curt Sprenger ...> wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>
John,
The Video is very good, much better than I expected for a cheap system. And more than good enough for backing up to a trailer.
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
On Sat, Oct 10, 2009 at 2:39 PM, John
<"jc_oop@sbcglobal.net"> wrote:
ÃÂ
I have seen these at various places.ÃÂ ÃÂ While I don't expect HD Quality, how good is the video?ÃÂ
ÃÂ
thanks
John
ÃÂ
----- Original Message -----
From: "jburgessx2@yahoo.com"
To: "WanderlodgeForum@yahoogroups.com"
Sent: Saturday, October 10, 2009 08:00
Subject: [WanderlodgeForum] Re: Hitch Camera
ÃÂ
Curt,
Which camera did you use? Sounds like the transmitter works fine from the bed but I didn't think the reception would be that good.
Jerry
85 PT40
--- In "WanderlodgeForum@yahoogroups.com", Curt Sprenger wrote:
>
> The 'Bird "Hitch Camera" installation was completed today except for the
> final location/mounting of the Monitor. All is working great. This is a John
> Finn addition to his coach and copied for our coach and our Dodge Ram 3500
> too. The additional Transmitter cable length allowed for locating the
> Transmitter to the bed pedestal front...could move it forward of that
> location but not needed.
>
>
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>