Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAN BLADE FOR AIR CONDITIONER
11-10-2006, 11:06
Post: #1
FAN BLADE FOR AIR CONDITIONER
I am tryng to bring my dash air back to life on my 1983 FC-35 SB
When i got the condenser installed and engergized i discovered that
the white plastic fan Blade on one motor is broken. I have called blue
bird, they don't carry them any longer. does anyone know when to get
one.??

re brake 1983 FC-35 SB "Sagecoach"
Quote this message in a reply
11-10-2006, 12:12
Post: #2
FAN BLADE FOR AIR CONDITIONER
Consider replacing the condenser with a 134a compatible unit. I used Red Dot.
Make sure you replace the receiver dryer and expansion valve. I got to do mine
twice because I didn't do the e/valve the first time, got clogged with debris.
Randy Dupree helped me out a good a bit on the rework and it's still working
fine.
MH
----- Original Message -----
From: putneyflash
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, November 10, 2006 5:06 PM
Subject: [WanderlodgeForum] FAN BLADE FOR AIR CONDITIONER


I am tryng to bring my dash air back to life on my 1983 FC-35 SB
When i got the condenser installed and engergized i discovered that
the white plastic fan Blade on one motor is broken. I have called blue
bird, they don't carry them any longer. does anyone know when to get
one.??

re brake 1983 FC-35 SB "Sagecoach"





[Non-text portions of this message have been removed]
Quote this message in a reply
11-10-2006, 14:52
Post: #3
FAN BLADE FOR AIR CONDITIONER
Mike,
Please provide the Red Dot parts and part numbers that you used. Thanks.

Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.

Mike Hohnstein wrote:

>Consider replacing the condenser with a 134a compatible unit. I used Red Dot.
Make sure you replace the receiver dryer and expansion valve. I got to do mine
twice because I didn't do the e/valve the first time, got clogged with debris.
>Randy Dupree helped me out a good a bit on the rework and it's still working
fine.
>MH
>
>
>
Quote this message in a reply
11-11-2006, 00:01
Post: #4
FAN BLADE FOR AIR CONDITIONER
Thanks mike: as i work at a CAT shop we will try the upgrade first, but i know
where to proceed if it fails
>
> From: Curt Sprenger
> Date: 2006/11/10 Fri PM 09:52:45 EST
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] FAN BLADE FOR AIR CONDITIONER
>
> Mike,
> Please provide the Red Dot parts and part numbers that you used. Thanks.
>
> Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.
>
> Mike Hohnstein wrote:
>
> >Consider replacing the condenser with a 134a compatible unit. I used Red
Dot. Make sure you replace the receiver dryer and expansion valve. I got to do
mine twice because I didn't do the e/valve the first time, got clogged with
debris.
> >Randy Dupree helped me out a good a bit on the rework and it's still working
fine.
> >MH
> >
> >
> >
>
>
Quote this message in a reply
11-11-2006, 06:31
Post: #5
FAN BLADE FOR AIR CONDITIONER
I can't find the receipt, I found it on the Red Dot website, located a local
dealer and had them get it for me. The one I chose has two fans on top is
roughly 3 times the capacity of the original R 12 unit. 134 needs more
condensor.
MH
----- Original Message -----
From: Curt Sprenger
To: WanderlodgeForum@yahoogroups.com
Sent: Friday, November 10, 2006 8:52 PM
Subject: Re: [WanderlodgeForum] FAN BLADE FOR AIR CONDITIONER


Mike,
Please provide the Red Dot parts and part numbers that you used. Thanks.

Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.

Mike Hohnstein wrote:

>Consider replacing the condenser with a 134a compatible unit. I used Red Dot.
Make sure you replace the receiver dryer and expansion valve. I got to do mine
twice because I didn't do the e/valve the first time, got clogged with debris.
>Randy Dupree helped me out a good a bit on the rework and it's still working
fine.
>MH
>
>
>




[Non-text portions of this message have been removed]
Quote this message in a reply
11-11-2006, 11:02
Post: #6
FAN BLADE FOR AIR CONDITIONER
Mike,
Check this link. http://www.tknw.com/Products/RedDot/Condensers.asp

Any of the two fan units look like what you used?

Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.



Mike Hohnstein wrote:

>I can't find the receipt, I found it on the Red Dot website, located a local
dealer and had them get it for me. The one I chose has two fans on top is
roughly 3 times the capacity of the original R 12 unit. 134 needs more
condensor.
>MH
> ----- Original Message -----
> From: Curt Sprenger
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, November 10, 2006 8:52 PM
> Subject: Re: [WanderlodgeForum] FAN BLADE FOR AIR CONDITIONER
>
>
> Mike,
> Please provide the Red Dot parts and part numbers that you used. Thanks.
>
> Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.
>
> Mike Hohnstein wrote:
>
> >Consider replacing the condenser with a 134a compatible unit. I used Red
Dot. Make sure you replace the receiver dryer and expansion valve. I got to do
mine twice because I didn't do the e/valve the first time, got clogged with
debris.
> >Randy Dupree helped me out a good a bit on the rework and it's still working
fine.
> >MH
> >
> >
> >
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
Quote this message in a reply
11-11-2006, 13:14
Post: #7
FAN BLADE FOR AIR CONDITIONER
6260 is the one.
MH
----- Original Message -----
From: Curt Sprenger
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, November 11, 2006 5:02 PM
Subject: Re: [WanderlodgeForum] FAN BLADE FOR AIR CONDITIONER


Mike,
Check this link. http://www.tknw.com/Products/RedDot/Condensers.asp

Any of the two fan units look like what you used?

Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.

Mike Hohnstein wrote:

>I can't find the receipt, I found it on the Red Dot website, located a local
dealer and had them get it for me. The one I chose has two fans on top is
roughly 3 times the capacity of the original R 12 unit. 134 needs more
condensor.
>MH
> ----- Original Message -----
> From: Curt Sprenger
> To: WanderlodgeForum@yahoogroups.com
> Sent: Friday, November 10, 2006 8:52 PM
> Subject: Re: [WanderlodgeForum] FAN BLADE FOR AIR CONDITIONER
>
>
> Mike,
> Please provide the Red Dot parts and part numbers that you used. Thanks.
>
> Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.
>
> Mike Hohnstein wrote:
>
> >Consider replacing the condenser with a 134a compatible unit. I used Red
Dot. Make sure you replace the receiver dryer and expansion valve. I got to do
mine twice because I didn't do the e/valve the first time, got clogged with
debris.
> >Randy Dupree helped me out a good a bit on the rework and it's still
working fine.
> >MH
> >
> >
> >
>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>




[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)