AC power lost on one leg

[Don Bradner]

My generator is different than yours (a "Universal" only used in 1990, I think),
that runs at 130v no-load at 60Hz. If I set its speed down at all the voltage
will drop, but so will the Hz. Under significant load it drops to around 128v.

I've not experienced any problems except I had to set the max level for my
inverter (ProSine 2.0) to 131 or it won't kick out of inversion mode.

Don Bradner
90 PT40 "Blue Thunder"
My location: http://www.bbirdmaps.com/user2.cfm?user=1

On 7/30/2010 at 11:27 PM artw wrote:

>--- In WanderlodgeForum@yahoogroups.com, "Fred Hulse" wrote:
>>
>> Art
>> Check the circuit breakers at your panel and also you may have circuit
>brkrs at the genset.
>> Fred Hulse
>> 97BB41
>>
>Ckt breakers cheched OK.
>
>Today I took the cover off the AC breaker panel.
>I disc. the two inputs to the panel and swapped them. Started the genset
>and had power to both legs. I ran it for about 20 minutes. Nothing
>abnormal. I am curious as to why the main voltmeters both about 130v.
>Is that in range?
>
>
>Art Weatherly
>Riverside Ca
>'85 PT36