Onan DKD Genset

[williamcharrison]

Just got back from a trip with no 110v generator output.
The motor runs fine but no 110v. I took it to an ONAN service
center and they said it was a bad xfer switch but that they had
actualy had it running propery (all lights and air). I tried the
genset today and no 110v again, so I took the cover off the xfer
switch and re-started the generator. After the time delay the
contactor pulled in and I measured 110v in on both hot wires from the
black cable bundle entering on the top right (I assume that is from
the generator) and 110v out on both hot wires exiting in the white
cable bundle at the xfer switch bottom but I still do not have 110v in
the coach. I checked the dual breaker located in the compartment
behind the batteries and it was on. The main breaker in the ac distribution
panel was on as well as the receptacle power. Neither leg1 or 2 voltmeters
indicate anything unless I switch on the leg1 switch in the panel.

Any help would be appreciated.

Chuck Harrison
Akron, Ohio
90 WLSP36