High beams on dim

[Bob Lawrence]

Well, got the high beam on dim problem fixed by Ralph here in Duncan,
Ok.
Turns out a previous owner had made the headlight mod ok, but swapped
wires (high to low) on one side and swapped them wrong on the other
side. Also a ground wire wasn't that well grounded.
This problem has been on the bird for about 9 years before it got fixed
today.
Kudos to Ralph for finding this problem. This guy can find ANY electric
problem.

Bob Lawrence
84 PT 36
Duncan, Ok

> Bruce,
> You are absolutely correct, this is a classic bad ground symptom.
> Gardner
> 83FC35