Sucking Air

[Gregory OConnor]

I wipe all the seals and surfaces with red grease befor fitting
together (oilfilters too). There is a Hydronic Heat forum on yahoo
maybe they know of a issue
GregoryO'Connor
94ptRomolandCa

--- In WanderlodgeForum@yahoogroups.com, "Leroy A. Eckert"
wrote:
>
> I changed the filter on my Webasto, new seals etc. The thing fired
> fine after starting the main engine to purge the lines. If it sits
for
> a couple of hours without firing it loses prime. No leaks, no air
in
> the site bowl and the check valve is good. I have taken the filter
> housing apart 3 times and cannot find how this is happening.
> Everything a ok before the filter change. Anyone with a Aquahot ot
> Webasto had this problem?
>
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>