seat and shoulder belts

[Stephen Birtles]

There is another way but very expensive is to buy new seats with
unified seat belts
Stephen 77fc35


--- In WanderlodgeForum@yahoogroups.com, "James Hutchings"
wrote:
>
> That might be a bit of a job. I would think the only safe way to do it
> would be to remove the wall panel and weld in a bracket to allow for a
> shoulder type belt. I think you will be able to locate the old floor
holes
> by looking from below, or pulling up the current carpet. It might
help to
> look and see how shoulder belts are installed in newer coaches. Let
us all
> know if you do the project, it would be nice to have that added
safety, yet
> I usually feel that I have to be more careful of the other guy for his
> safety, not mine.
>
>
>
>
>
> Jim
>
>
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of bubblerboy64
> Sent: Monday, July 09, 2007 9:32 AM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] seat and shoulder belts
>
>
>
> My 1973 has had all the belts removed. I'd like to install shoulder
> and lap belts. Found a location online selling belts brackets etc.
> Any one with experience on this perhaps you would give me some basic
> instructions. I am mostly concerned about the anchor point for the
> shoulder part of the install. I assume that the floor area is pretty
> straight forward. I am hoping that I can find and use the original
> anchor points on the floor. Area has been re carpeted but hopefully
> I can locate and use them. I told you guys I'd have lots of
> questions. Its going well however for me and I am really enjoying
> the process.
>
> John Heckman
> Central Pa
> 1973 FC
>
>
>
>
>
> [Non-text portions of this message have been removed]
>