Dead Levelers Continued

[Lucas Willemse]

I had the same problem with my 1980 FC 35. The motor burned up because
it stayed on. There is no fuse or cicuit breaker for this. I added a
150 AMP cicrcuit breaker and now if the switches stick the breaker
will trip. I had the motor rewound at an automotive starter repair
shop I think it came to about $60.00. The circuit breaker was
purchased from West Marine it is a surface mount Blue Sea unit. I
mounted the breaker under the step that lifts up to check the oil
level in the pump. I just had to cut the cable supplying the power to
the solonoid for the pump and routed it through the breaker.


Lucas Willemse
1980 FC35
Los Angeles