Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
12.5KW Perkins genny fuel return line
06-20-2010, 02:38
Post: #1
12.5KW Perkins genny fuel return line
I have a 1980 FC35 with the 12.5KW Perkins genny. The fuel return line has a
crack in it. This is the line going across the top of all four injectors and is
attached with four banjo bolts. Does anyone have a used one for sale? Thanks in
advance Rick in Ohio 419 345 0060
Quote this message in a reply
06-21-2010, 09:46
Post: #2
12.5KW Perkins genny fuel return line
Rick,

Rather than trying to find a used one of unknown quality, that return fuel line
should still be available from Perkins. You need to find a good Perkins dealer
and give them the engine spec number and serial number.

The hard part is usually finding a local Perkins dealer. When I had my 83 PT40,
I had found a good one here in San Antonio. Go to
http://www.perkins.com/northamerica to start the search in your state.

Happy hunting.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX


--- In WanderlodgeForum@yahoogroups.com, "Rick" wrote:
>
> I have a 1980 FC35 with the 12.5KW Perkins genny. The fuel return line has a
crack in it. This is the line going across the top of all four injectors and is
attached with four banjo bolts. Does anyone have a used one for sale? Thanks in
advance Rick in Ohio 419 345 0060
>
Quote this message in a reply
06-22-2010, 00:05
Post: #3
12.5KW Perkins genny fuel return line
My sentiments exactly. I looked at it and repairing it would be hard since it is so small. If there was one used it would have turned up by now. I ordered it yesterday from a Perkins supply house in Massilon, Ohio. It had been leaking forever. Now I have to get the injectors popped off to see which one is not working too well. I can hear a cylinder dropping out of sequence every so often. I have a turbocharger from a 1.9 litre VW industrial engine to put on it. It looks like no mods to the engine just reroute a few things and hoping it will absorb some noise having to turn the spool. Rick in Ohio

--- On Mon, 6/21/10, mbulriss <mbulriss@...> wrote:

From: mbulriss <mbulriss@...>
Subject: [WanderlodgeForum] Re: 12.5KW Perkins genny fuel return line
To: WanderlodgeForum@yahoogroups.com
Date: Monday, June 21, 2010, 5:46 PM


Rick,

Rather than trying to find a used one of unknown quality, that return fuel line should still be available from Perkins. You need to find a good Perkins dealer and give them the engine spec number and serial number.

The hard part is usually finding a local Perkins dealer. When I had my 83 PT40, I had found a good one here in San Antonio. Go to
http://www.perkins.com/northamerica to start the search in your state.

Happy hunting.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX

--- In WanderlodgeForum@yahoogroups.com, "Rick" wrote:
>
> I have a 1980 FC35 with the 12.5KW Perkins genny. The fuel return line has
a crack in it. This is the line going across the top of all four injectors and is attached with four banjo bolts. Does anyone have a used one for sale? Thanks in advance Rick in Ohio 419 345 0060
>

Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)