Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuel Injectors - 77 FC33
04-06-2008, 08:40
Post: #1
Fuel Injectors - 77 FC33


The dog house has 2 hinges, each with a set screw. The base has 2 screws on the firewall and various bolts around the base under the carpet. It takes 2 to handle the top part of the dog house- its' heavy.
Ernie Ekberg
83PT40
Livingston, Montana
currently in oakley, kansas




Planning your summer road trip? Check out AOL Travel Guides.
Quote this message in a reply
04-06-2008, 10:35
Post: #2
Fuel Injectors - 77 FC33
My mechanic says that the engine has to come out to replace the
injector on the passenger side. Is this true? Is there something he's
missing, does the floor board come out so the valve covers can be
removed, this seems to be the problem. Joe in Sebastian
Quote this message in a reply
04-06-2008, 12:05
Post: #3
Fuel Injectors - 77 FC33
--- In WanderlodgeForum@yahoogroups.com, "c.martha37"
wrote:
>
> My mechanic says that the engine has to come out to replace the
> injector on the passenger side. Is this true? Is there something
he's
> missing, does the floor board come out so the valve covers can be
> removed, this seems to be the problem. Joe in Sebastian


If you have the original Blue Box somewhere it gives details on how to
disassemble the Dog house so you can get at the Vlv covers. I just
went over to Bruces site and tried to find the photo's I took while
taking my apart but could not locate them. Its not that hard of a job,
just time consuming. The dog house will come oft with about an hour
worth of labor. Let me know if you have a blue box instruction book
for this operation. And I would say you should be able to remove
those injectors with the dog house removed. Jon
>
Jon\Rebel Bird
Quote this message in a reply
04-09-2008, 13:03
Post: #4
Fuel Injectors - 77 FC33
Thanks much.
--- In WanderlodgeForum@yahoogroups.com, erniecarpet@... wrote:
>
> The dog house has 2 hinges, each with a set screw. The base has 2
screws on
> the firewall and various bolts around the base under the carpet. It
takes 2 to
> handle the top part of the dog house- its' heavy.
>
> Ernie Ekberg
> 83PT40
> Livingston, Montana
>
> currently in oakley, kansas
>
>
>
> **************Planning your summer road trip? Check out AOL Travel
Guides.
>
(http://travel.aol.com/travel-guide/unite...00000\
016)
>
Quote this message in a reply
04-09-2008, 13:05
Post: #5
Fuel Injectors - 77 FC33
John, thanks for the info. I do not have 'blue box'. I downloaded
some info from the archive files on this forum. I'll send to
mechanic and forward this information to him. Thanks.

--- In WanderlodgeForum@yahoogroups.com, "Jon" wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, "c.martha37"
> wrote:
> >
> > My mechanic says that the engine has to come out to replace the
> > injector on the passenger side. Is this true? Is there
something
> he's
> > missing, does the floor board come out so the valve covers can
be
> > removed, this seems to be the problem. Joe in Sebastian
>
>
> If you have the original Blue Box somewhere it gives details on
how to
> disassemble the Dog house so you can get at the Vlv covers. I
just
> went over to Bruces site and tried to find the photo's I took
while
> taking my apart but could not locate them. Its not that hard of a
job,
> just time consuming. The dog house will come oft with about an
hour
> worth of labor. Let me know if you have a blue box instruction
book
> for this operation. And I would say you should be able to remove
> those injectors with the dog house removed. Jon
> >
> Jon\Rebel Bird
>
Quote this message in a reply
04-09-2008, 13:51
Post: #6
Fuel Injectors - 77 FC33
If you will send me your email I will send you the owners manuals for
the 77 bird
Stephen 77fc35

--- In WanderlodgeForum@yahoogroups.com, "c.martha37"
wrote:
>
> My mechanic says that the engine has to come out to replace the
> injector on the passenger side. Is this true? Is there something he's
> missing, does the floor board come out so the valve covers can be
> removed, this seems to be the problem. Joe in Sebastian
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)