Flooring Upgrade

[Curt Sprenger]

We'll will be upgrading to wood floor starting with the kitchen and
all the way forward. Can the seat belts and the drivers & copilot
seats be removed without creating any problems getting them
reinstalled after the wood floor is in?

The wood floor will be here tomorrow. I'm floating the floor.
--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA

[erniecarpet@...]

You can remove and install all those items, Curt. Beware the seats and belts
may have to have longer bolts upon reinstallation.

Ernie Ekberg
83PT40
Weatherford, Tx




************************************** See what's new at http://www.aol.com


[Non-text portions of this message have been removed]

[Curt Sprenger]

Thanks, Ernie. I haven't check yet, but getting to the bolts from
under the floor could be a problem.

On Nov 8, 2007 5:17 AM, wrote:
>
>
>
>
>
>
> You can remove and install all those items, Curt. Beware the seats and belts
> may have to have longer bolts upon reinstallation.
>
> Ernie Ekberg
> 83PT40
> Weatherford, Tx
>
> ************************************** See what's new at http://www.aol.com
>
> [Non-text portions of this message have been removed]
>
>



--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA

[Glenn Allen]

Curt,

I was able to put in the seat belts after the wood floor upgrade. I
don't know of the differences in our coaches, but the passenger seat
was no problem. I also did the chair closest to the booth. The chair
closest to the passenger seat might be a problem (on mine, it is above
the storage bay compartment so I have not replaced it's belt).

Glenn Allen
1986 PT-40
Marietta, GA

--- In WanderlodgeForum@yahoogroups.com, "Curt Sprenger"
wrote:
>
> We'll will be upgrading to wood floor starting with the kitchen and
> all the way forward. Can the seat belts and the drivers & copilot
> seats be removed without creating any problems getting them
> reinstalled after the wood floor is in?
>
> The wood floor will be here tomorrow. I'm floating the floor.
> --
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>