We'll will be upgrading to wood floor starting with the kitchen and
all the way forward. Can the seat belts and the drivers & copilot
seats be removed without creating any problems getting them
reinstalled after the wood floor is in?
The wood floor will be here tomorrow. I'm floating the floor.
--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
You can remove and install all those items, Curt. Beware the seats and belts
may have to have longer bolts upon reinstallation.
Ernie Ekberg
83PT40
Weatherford, Tx
************************************** See what's new at
http://www.aol.com
[Non-text portions of this message have been removed]
Thanks, Ernie. I haven't check yet, but getting to the bolts from
under the floor could be a problem.
On Nov 8, 2007 5:17 AM,
wrote:
>
>
>
>
>
>
> You can remove and install all those items, Curt. Beware the seats and belts
> may have to have longer bolts upon reinstallation.
>
> Ernie Ekberg
> 83PT40
> Weatherford, Tx
>
> ************************************** See what's new at http://www.aol.com
>
> [Non-text portions of this message have been removed]
>
>
--
Curt Sprenger
1987 PT38 8V92 "MacAttack Racing"
Anaheim Hills, CA
Curt,
I was able to put in the seat belts after the wood floor upgrade. I
don't know of the differences in our coaches, but the passenger seat
was no problem. I also did the chair closest to the booth. The chair
closest to the passenger seat might be a problem (on mine, it is above
the storage bay compartment so I have not replaced it's belt).
Glenn Allen
1986 PT-40
Marietta, GA
--- In
WanderlodgeForum@yahoogroups.com, "Curt Sprenger"
wrote:
>
> We'll will be upgrading to wood floor starting with the kitchen and
> all the way forward. Can the seat belts and the drivers & copilot
> seats be removed without creating any problems getting them
> reinstalled after the wood floor is in?
>
> The wood floor will be here tomorrow. I'm floating the floor.
> --
> Curt Sprenger
> 1987 PT38 8V92 "MacAttack Racing"
> Anaheim Hills, CA
>