Mirror set screws

[Jerry Burgess]

John,

So, are these also the ones with the defrost? If so, I might be interested in a set since my mirrors are starting to deteriorate as well.

Jerry

85 PT40

---

From: "jvredden@..."
To: WanderlodgeForum@yahoogroups.com
Sent: Monday, April 27, 2009 1:34:54 PM
Subject: Re: [WanderlodgeForum] Mirror set screws

Yes
John Redden
91 PT 40
NC


Sent from my BlackBerry® smartphone with SprintSpeed

---

From: Ernie Ekberg
Date: Mon, 27 Apr 2009 13:24:05 -0700 (PDT)
To:
Subject: Re: [WanderlodgeForum] Mirror set screws

Are these the mirrors with the BB logo on them? Ernie Ekberg 83PT40 Wanderlodge Weatherford, Tx http://autos. groups.yahoo. com/group/ erniesremodeling andrepair --- On Mon, 4/27/09, jvredden@aol. com wrote: From: jvredden@aol. com Subject: Re: [WanderlodgeForum] Mirror set screws To: WanderlodgeForum@ yahoogroups. com Date: Monday, April 27, 2009, 3:10 PM I bought a set of BB mirrors at FMCA for $150.00. Some guy had a bunch. I can call a friend and see if more are available. John Redden 91 PT 40 NC Sent from my BlackBerry® smartphone with SprintSpeed From: "jburgessx2" Date: Sun, 26 Apr 2009 23:44:33 -0000 To: Subject: [WanderlodgeForum] Mirror set screws So, has anyone had to do battle with the set screws on their mirrors? The PO had the mirrors set to his specifications and it serves my purposes for the most part. But, I wanted to tweak them and was unable to loosen hex screws on the bottom or side. I sprayed the set screws with PB Blaster and let it set overnight. I put a breaker bar on the hex key and was still unable to budge them. Any thoughts???? Jerry 85 PT40

[GARY MINKER]

The best mechanic trick is to PB them, let them sit, warm the knuckle to about 120 degrees gently, let it cool completely, repeat 2 to 3 times then tighten first, then loosen. Gentle persuasion with a SMALL impact wrench forward then backward may help to vibrate the capillary action of the PB. Gary --- On Mon, 4/27/09, jvredden@... wrote: From: jvredden@... Subject: Re: [WanderlodgeForum] Mirror set screws To: WanderlodgeForum@yahoogroups.com Date: Monday, April 27, 2009, 4:10 PM I bought a set of BB mirrors at FMCA for $150.00. Some guy had a bunch. I can call a friend and see if more are available. John Redden 91 PT 40 NC Sent from my BlackBerry® smartphone with SprintSpeed From: "jburgessx2" Date: Sun, 26 Apr 2009 23:44:33 -0000 To: Subject: [WanderlodgeForum] Mirror set screws So, has anyone had to do battle with the set screws on their mirrors? The PO had the mirrors set to his specifications and it serves my purposes for the most part. But, I wanted to tweak them and was unable to loosen hex screws on the bottom or side. I sprayed the set screws with PB Blaster and let it set overnight. I put a breaker bar on the hex key and was still unable to budge them. Any thoughts???? Jerry 85 PT40