Gen has stop making electricity
|
11-12-2007, 04:46
Post: #1
|
|||
|
|||
Gen has stop making electricity
Scott, do you have the manual or automatic change over switch?
Ernie Ekberg 83PT40 Weatherford, Tx ************************************** See what's new at http://www.aol.com [Non-text portions of this message have been removed] |
|||
11-12-2007, 08:25
Post: #2
|
|||
|
|||
Gen has stop making electricity
My Kohler generator has stopped making juice. Engine part is fine.
Ideas to troubleshoot? Scott Forman 86 PT38 Memphis |
|||
11-12-2007, 08:33
Post: #3
|
|||
|
|||
Gen has stop making electricity
Scott,
You made sure that the breakers on the generator are not tripped? Al Johnson '96 BMC B75 ==> B100 Mandeville, Louisiana --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...> wrote: > > My Kohler generator has stopped making juice. Engine part is fine. > Ideas to troubleshoot? > > Scott Forman > 86 PT38 > Memphis > |
|||
11-12-2007, 09:43
Post: #4
|
|||
|
|||
Gen has stop making electricity
Yes
--- In WanderlodgeForum@yahoogroups.com, "Al" > > Scott, > You made sure that the breakers on the generator are not tripped? > > Al Johnson > '96 BMC B75 ==> B100 > Mandeville, Louisiana > > --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@> > wrote: > > > > My Kohler generator has stopped making juice. Engine part is fine. > > Ideas to troubleshoot? > > > > Scott Forman > > 86 PT38 > > Memphis > > > |
|||
11-12-2007, 15:31
Post: #5
|
|||
|
|||
Gen has stop making electricity
Manual
--- In WanderlodgeForum@yahoogroups.com, erniecarpet@... wrote: > > Scott, do you have the manual or automatic change over switch? > > Ernie Ekberg > 83PT40 > Weatherford, Tx > > > > > ************************************** See what's new at http://www.aol.com > > > [Non-text portions of this message have been removed] > |
|||
11-12-2007, 15:37
Post: #6
|
|||
|
|||
Gen has stop making electricity
Scott, it is fairly easy to inspect the brushes and leads so have you
checked them to see if they are good? Dan 88pt38 Jackson, MS _____ From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Scott Forman Sent: Monday, November 12, 2007 9:32 PM To: WanderlodgeForum@yahoogroups.com Subject: [WanderlodgeForum] Re: Gen has stop making electricity Manual --- In WanderlodgeForum@ yahoogroups.com, erniecarpet@... wrote: > > Scott, do you have the manual or automatic change over switch? > > Ernie Ekberg > 83PT40 > Weatherford, Tx > > > > > ************************************** See what's new at http://www.aol. <http://www.aol.com> com > > > [Non-text portions of this message have been removed] > [Non-text portions of this message have been removed] |
|||
11-13-2007, 17:26
Post: #7
|
|||
|
|||
Gen has stop making electricity
Yup. Check those brushes. If they're good, check the voltage regulator next.
-Ryan '86 PT-40 8V92 On 11/12/07, Dan Williams > > Scott, it is fairly easy to inspect the brushes and leads so have you > checked them to see if they are good? > > Dan > 88pt38 > Jackson, MS |
|||
11-14-2007, 02:13
Post: #8
|
|||
|
|||
Gen has stop making electricity
--- In WanderlodgeForum@yahoogroups.com, "Ryan Wright"
> > Yup. Check those brushes. If they're good, check the voltage regulator next. > > -Ryan > '86 PT-40 8V92 > > On 11/12/07, Dan Williams > > > > Scott, it is fairly easy to inspect the brushes and leads so have you > > checked them to see if they are good? > > > > Dan > > 88pt38 > > Jackson, MS > If it is a transformer regulated generator then check the taps on the transformer. Mine started making 80 volts instead of 120. After much searching i grabbed the wires and shook one loose from the sapde connector. Fixed that and was back in business at 120 volts. Bob Criss 90SP36 Bethel Park, PA |
|||
11-14-2007, 11:32
Post: #9
|
|||
|
|||
Gen has stop making electricity
It's down at the shop now, same guys who rebuilt the Kohler in my 82
FC (I knew it was bad when I bought the coach). I am sure they will find it, I just hope it isn't the same problem that killed the other one. Scott --- In WanderlodgeForum@yahoogroups.com, "Ryan Wright" > > Yup. Check those brushes. If they're good, check the voltage regulator next. > > -Ryan > '86 PT-40 8V92 > > On 11/12/07, Dan Williams > > > > Scott, it is fairly easy to inspect the brushes and leads so have you > > checked them to see if they are good? > > > > Dan > > 88pt38 > > Jackson, MS > |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)