Wanderlodge Gurus - The Member Funded Wanderlodge Forum

Scott, do you have the manual or automatic change over switch?

Ernie Ekberg
83PT40
Weatherford, Tx




************************************** See what's new at http://www.aol.com


[Non-text portions of this message have been removed]

My Kohler generator has stopped making juice. Engine part is fine.
Ideas to troubleshoot?

Scott Forman
86 PT38
Memphis

Scott,
You made sure that the breakers on the generator are not tripped?

Al Johnson
'96 BMC B75 ==> B100
Mandeville, Louisiana

--- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@...>
wrote:
>
> My Kohler generator has stopped making juice. Engine part is fine.
> Ideas to troubleshoot?
>
> Scott Forman
> 86 PT38
> Memphis
>

Yes

--- In WanderlodgeForum@yahoogroups.com, "Al" wrote:
>
> Scott,
> You made sure that the breakers on the generator are not
tripped?
>
> Al Johnson
> '96 BMC B75 ==> B100
> Mandeville, Louisiana
>
> --- In WanderlodgeForum@yahoogroups.com, "Scott Forman" <sforman@>
> wrote:
> >
> > My Kohler generator has stopped making juice. Engine part is
fine.
> > Ideas to troubleshoot?
> >
> > Scott Forman
> > 86 PT38
> > Memphis
> >
>

Manual

--- In WanderlodgeForum@yahoogroups.com, erniecarpet@... wrote:
>
> Scott, do you have the manual or automatic change over switch?
>
> Ernie Ekberg
> 83PT40
> Weatherford, Tx
>
>
>
>
> ************************************** See what's new at
http://www.aol.com
>
>
> [Non-text portions of this message have been removed]
>

Scott, it is fairly easy to inspect the brushes and leads so have you
checked them to see if they are good?

Dan

88pt38

Jackson, MS



_____

From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Scott Forman
Sent: Monday, November 12, 2007 9:32 PM
To: WanderlodgeForum@yahoogroups.com
Subject: [WanderlodgeForum] Re: Gen has stop making electricity



Manual

--- In WanderlodgeForum@
yahoogroups.com, erniecarpet@... wrote:
>
> Scott, do you have the manual or automatic change over switch?
>
> Ernie Ekberg
> 83PT40
> Weatherford, Tx
>
>
>
>
> ************************************** See what's new at
http://www.aol. <http://www.aol.com> com
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]

Yup. Check those brushes. If they're good, check the voltage regulator next.

-Ryan
'86 PT-40 8V92

On 11/12/07, Dan Williams wrote:
>
> Scott, it is fairly easy to inspect the brushes and leads so have you
> checked them to see if they are good?
>
> Dan
> 88pt38
> Jackson, MS

--- In WanderlodgeForum@yahoogroups.com, "Ryan Wright"
wrote:
>
> Yup. Check those brushes. If they're good, check the voltage
regulator next.
>
> -Ryan
> '86 PT-40 8V92
>
> On 11/12/07, Dan Williams wrote:
> >
> > Scott, it is fairly easy to inspect the brushes and leads so have
you
> > checked them to see if they are good?
> >
> > Dan
> > 88pt38
> > Jackson, MS
>
If it is a transformer regulated generator then check the taps on the
transformer. Mine started making 80 volts instead of 120. After
much searching i grabbed the wires and shook one loose from the sapde
connector. Fixed that and was back in business at 120 volts.
Bob Criss
90SP36
Bethel Park, PA

It's down at the shop now, same guys who rebuilt the Kohler in my 82
FC (I knew it was bad when I bought the coach). I am sure they will
find it, I just hope it isn't the same problem that killed the other
one.

Scott

--- In WanderlodgeForum@yahoogroups.com, "Ryan Wright"
wrote:
>
> Yup. Check those brushes. If they're good, check the voltage
regulator next.
>
> -Ryan
> '86 PT-40 8V92
>
> On 11/12/07, Dan Williams wrote:
> >
> > Scott, it is fairly easy to inspect the brushes and leads so have
you
> > checked them to see if they are good?
> >
> > Dan
> > 88pt38
> > Jackson, MS
>