New to Bluebird

[Don Bradner]

There have been dozens of threads about it over the past few years, both here
and at wanderlodgeownersgroup.com so searches in the two forums on compressor
hose, or coolant hose, will likely turn up a lot.

There are a couple of hard parts. The biggest one is just getting at them. The
next is making sure the fittings don't get broken off in the block.

I do a lot of my own maintenance, but this is not something I was willing to
tackle. I was lucky enough to catch Randy Dupree at a good moment in time in
Florida and he and his helper did it for me. Such spare moments are probably
rare for Randy.

Don Bradner
90 PT40 "Blue Thunder"
My location: http://www.bbirdmaps.com/user2.cfm?user=1

On 12/29/2010 at 2:23 PM Dan wrote:

>Hi Don, Do you know if anyone has posted the procedure for replacing the
>compressor hoses?
>
>Dan
>88PT38
>Jackson, MS

[GARY MINKER]

Make friends with your local hydraulic supply. They are a helpful bunch with custom hoses and fittings (and extractors) since every hose on your rig is custom at this point. gary 85pt40 --- On Wed, 12/29/10, Don Bradner wrote: From: Don Bradner Subject: Re: [WanderlodgeForum] New to Bluebird To: WanderlodgeForum@yahoogroups.com Date: Wednesday, December 29, 2010, 3:59 PM There have been dozens of threads about it over the past few years, both here and at wanderlodgeownersgroup.com so searches in the two forums on compressor hose, or coolant hose, will likely turn up a lot. There are a couple of hard parts. The biggest one is just getting at them. The next is making sure the fittings don't get broken off in the block. I do a lot of my own maintenance, but this is not something I was willing to tackle. I was lucky enough to catch Randy Dupree at a good moment in time in Florida and he and his helper did it for me. Such spare moments are probably rare for Randy. Don Bradner 90 PT40 "Blue Thunder" My location: http://www.bbirdmaps.com/user2.cfm?user=1 On 12/29/2010 at 2:23 PM Dan wrote: >Hi Don, Do you know if anyone has posted the procedure for replacing the >compressor hoses? > >Dan >88PT38 >Jackson, MS