Heater part

[Chuck Wheeler]

Besides the current draw of the heater you
need to know the cutoff temperature. I was lucky, the switch used in our
heaters was the same one used to protect most electric dryers so it was
available and cheap ($6.50) locally at Appliance parts.

- Chuck
Wheeler-

1982 FC 31SB Fort Worth TX

---

From: WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of David Ward

Sent: Wednesday, December 09, 2009
8:33 PM

To: WanderlodgeForum@yahoogroups.com

Subject: Re: [WanderlodgeForum]
Re: Heater part

Ron, I would think that given the wattage of the heater somebody like Grainger or Johnstone Supply should be able to come up with a high limit switch for it. Dave Ward 80FC31SB Mesa, AZ --- On Thu, 12/10/09, ronmarabito2002 net> wrote: From: ronmarabito2002 net> Subject: [WanderlodgeForum] Re: Heater part To: WanderlodgeForum@yahoogroups.com Date: Thursday, December 10, 2009, 2:26 AM They are not interested in selling anything for the old models. They only want to sell you a new heater unit complete. All I need is a less than $10 part and I intend to find it somewhere. Thanks for your response. R.E. (Ron) Marabito, Dallas, TX 92WB40 --- In WanderlodgeForum@ yahoogroups. com, "marvjeanm380" wrote: > > Ron: > > Cadet is located in Vancouver, WA. Their main part supplier is Reliable Parts. They have a location in the Portland, OR area that I have bought from. Their number is Sales: (503) 239-6050. Give them a call and they will either sell you a part or can provide you with a current model electric heater. I bought one for a project and it was suprisingly cheap. > > Marv > 2004 M380 > Ocean Shores, WA > > > --- In WanderlodgeForum@ yahoogroups. com, "ronmarabito2002" wrote: > > > > No temperature stamped on this one. Only markings are TOD-1-B1-B > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40 > > > > --- In WanderlodgeForum@ yahoogroups.. com, "Chuck Wheeler" wrote: > > > > > > Ron, if you look closely you should see a temperature stamped in it. This > > > is the cutoff temperature that protects from overheating. They are > > > available locally here from Granger, although I get most of my parts from > > > Appliance parts Co in Richland hills. > > > > > > > > > > > > - Chuck Wheeler- > > > > > > 1982 FC 31SB Fort Worth TX > > > > > > _____ > > > > > > From: WanderlodgeForum@ yahoogroups. com > > > [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf Of ronmarabito2002 > > > Sent: Wednesday, December 09, 2009 11:21 AM > > > To: WanderlodgeForum@ yahoogroups. com > > > Subject: [WanderlodgeForum] Re: Heater part > > > > > > > > > > > > > > > > > > Yes Curt. How do we determine the correct size? > > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40 > > > > > > --- In WanderlodgeForum@ Forum%40yahoogro ups.com> > > > yahoogroups. com, Curt Sprenger wrote: > > > > > > > > Ron, > > > > > > > > Look like this? > > > > > > > > http://www.thermodi > > > <http://www.thermodi sc.com/productde tail.asp? ProductID= 1> > > > sc.com/productdetai l.asp?ProductID= 1 > > > > > > > > the site has lots of them. > > > > > > > > > > > > Curt Sprenger > > > > 1987 PT38 8V92 "MacAttack Racing" > > > > Anaheim Hills, CA > > > > > > > > > > > > > > > > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote: > > > > > > > > > > > > > > > > > > > Studying this closer, it is probably a heat sensor or thermocouple. > > > > > > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40 > > > > > > > > > > --- In WanderlodgeForum@ Forum%40yahoogro ups.com> > > > yahoogroups. com, > > > > > "ronmarabito2002" wrote: > > > > > > > > > > > > Hi all: Does anyone have a source for the round disc resistor or > > > > > capacitor that mounts in the top of the Bathroom Electric Heater for a > > > > > 92WB40. Mine has disintegrated and can't get heat. > > > > > > > > > > > > It has TOD 1-B1-B stamped on it. > > > > > > > > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >