Heater part

[ronmarabito2002]

No temperature stamped on this one. Only markings are TOD-1-B1-B

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "Chuck Wheeler" wrote:
>
> Ron, if you look closely you should see a temperature stamped in it. This
> is the cutoff temperature that protects from overheating. They are
> available locally here from Granger, although I get most of my parts from
> Appliance parts Co in Richland hills.
>
>
>
> - Chuck Wheeler-
>
> 1982 FC 31SB Fort Worth TX
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of ronmarabito2002
> Sent: Wednesday, December 09, 2009 11:21 AM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Re: Heater part
>
>
>
>
>
> Yes Curt. How do we determine the correct size?
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
>
> --- In WanderlodgeForum@
> yahoogroups.com, Curt Sprenger wrote:
> >
> > Ron,
> >
> > Look like this?
> >
> > http://www.thermodi
> <http://www.thermodisc.com/productdetail.asp?ProductID=1>
> sc.com/productdetail.asp?ProductID=1
> >
> > the site has lots of them.
> >
> >
> > Curt Sprenger
> > 1987 PT38 8V92 "MacAttack Racing"
> > Anaheim Hills, CA
> >
> >
> >
> > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002 wrote:
> >
> > >
> > >
> > > Studying this closer, it is probably a heat sensor or thermocouple.
> > >
> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >
> > > --- In WanderlodgeForum@
> yahoogroups.com,
> > > "ronmarabito2002" wrote:
> > > >
> > > > Hi all: Does anyone have a source for the round disc resistor or
> > > capacitor that mounts in the top of the Bathroom Electric Heater for a
> > > 92WB40. Mine has disintegrated and can't get heat.
> > > >
> > > > It has TOD 1-B1-B stamped on it.
> > > >
> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > >
> > >
> > >
> > >
> >
>