Proper way to tow a Wanderlodge

[timvasqz]

Remove axle shaft???? is this in lue of removing a drive line? May be
this is done so the tow driver doesnt have to crawl under the bus?
The rear is not allison so I cant see where they predict damage at
the rear to demand you render motorchoach rear not moving during a
tow????? Plus what lubes the hubs when you remove the axle shaft. you
will need to displace the lost volumn of the metal of the shaft to
get oil up to the hub?

For me I would pull the bus to a parking lot with a chain off a tow
truck (you need a tow truck for compressed air)then call a mobil
truck repair tech to determine that repair required the bus be shop
stored. When things go to a shop most of the hours it is there is
just parking effort. Mobil tech are working on your bus every hour
they are there.

Greg ofTim&Greg
94ptCA


In WanderlodgeForum@yahoogroups.com, "Kurt Horvath"
wrote:
>
> When all else fails
>>
> ALLISON
> Operator's Manual

If the vehicle is a motor coach, remove the axle
> shafts from the drive wheels. When the axle shafts are removed, be
> sure to cover the wheel openings to prevent loss of lubricant and
> entry
> of dust and dirt. An auxiliary air supply will usually be required
> to actuate the vehicle brake system.
>
> >
> Kurt Horvath
> 95 PT 42
> 10AC
>
>