Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Auto Start Generator Troubleshooting
12-12-2007, 08:41
Post: #1
Auto Start Generator Troubleshooting
The Auto Gen Start is a little more complicated than I had hoped for. If you
need help on this call Larry Westhaven for the GENCON 9232. He does not build
them anymore but he will rebuild and service them.
http://www.westhaverassociates.com/GenCo...n_9232.asp
My first problem is a new generator; I have to check to see if it has the fly
wheel sensor and if the generator is compatible with the current circuit board,
if not it will need to be recalibrated.
Second the 12v adaptor/sensor is incorrect for the GENCON 9232.
Bluebird has a 120v outlet that the 12v adapter/sensor is plugged into I have to
check to see if it is hot while the inverters are on, if so it needs to be
rewired to reflect true shore power, According to Larry Westhaven it needs to be
wired into the 120v shore power before any transfer switches
There is some corrosion on the Circuit Board terminals.
So I¢m pulling out the 12v adapter/sensor and the GENCON 9232 and having it
rebuilt and recalibrated, check the power plug and Flywheel sensor, then if I
get lucky when it¢s reinstalled everything works. If not the wiring needs to
checked out. But the other parts need to working and checked out before that can
happen.

Kurt Horvath
95 PT-42
10AC



________________________________________________________________________________​\
____
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/...y=shopping

[Non-text portions of this message have been removed]
Quote this message in a reply
12-13-2007, 13:41
Post: #2
Auto Start Generator Troubleshooting
Have you check out the aftermarket auto starts? or contanct the BB
genset folks, Powertec? I understand they are very helpful.

When changing 120 electrical in the motorhome keep in mind that the
neutral is not bonded to ground in the pannel.
GregoryO'Connor
94ptRomolandCa


--- In WanderlodgeForum@yahoogroups.com, Kurt Horvath
wrote:
>
> The Auto Gen Start is a little more complicated than I had hoped
for. If you need help on this call Larry Westhaven for the GENCON
9232. He does not build them anymore but he will rebuild and
service them.
http://www.westhaverassociates.com/GenCo...n_9232.asp
> My first problem is a new generator; I have to check to see if it
has the fly wheel sensor and if the generator is compatible with the
current circuit board, if not it will need to be recalibrated.
> Second the 12v adaptor/sensor is incorrect for the GENCON 9232.
> Bluebird has a 120v outlet that the 12v adapter/sensor is plugged
into I have to check to see if it is hot while the inverters are on,
if so it needs to be rewired to reflect true shore power, According
to Larry Westhaven it needs to be wired into the 120v shore power
before any transfer switches
> There is some corrosion on the Circuit Board terminals.
> So I¢m pulling out the 12v adapter/sensor and the GENCON 9232 and
having it rebuilt and recalibrated, check the power plug and
Flywheel sensor, then if I get lucky when it¢s reinstalled
everything works. If not the wiring needs to checked out. But the
other parts need to working and checked out before that can happen.
>
> Kurt Horvath
> 95 PT-42
> 10AC
>
>
>
_____________________________________________________________________
_______________
> Looking for last minute shopping deals?
> Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/category.php?
category=shopping
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)