Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A great new wood / tile flooring product. Perfect for RVs.
12-19-2006, 11:23
Post: #1
A great new wood / tile flooring product. Perfect for RVs.
I just found a new flooring that is exactly what i've been looking for
for my Bird. I am getting ready to do some remodeling. For the
kitchen area i had decided to go with either a wood or a marble.
...But I didn't really want to use real wood or marble because of the
thicknesses and weights involved. But on the other hand i don't like
most of the fake woods or linoleum looks (at least for a higher end
look).

While at a Corner Bakery here in North Dallas last week (it was being
remodeled), i kept noticing the floor. It looked very much like wood,
but I wasn't sure and i didn't think they would put in real wood. The
edges of each plank were beveled and there were no seams like in a
linoleum type product. So today i went to the Home Depot Flooring
Store and discovered a new (at least i had never seen it) product
called Amtico. http://www.amtico.com It's not cheap, about $5/sf. But then
i don't need a lot of it. They have some that look like woods.
Others look like marble or tile. Best looking product i've seen. For
"wood", it is sold in planks. Tiles are tile-size pieces. They also
have decor pieces.

Take a look if you're thinking about doing new floors.

I'll also be replacing carpet. Any secrets you guys have discoved
about doing that or choosing carpets that I need to know?

Thanks,
Alan 87FC35
Quote this message in a reply
12-19-2006, 12:52
Post: #2
A great new wood / tile flooring product. Perfect for RVs.
Alan, Amtico is good stuff. I used their tile product in a raised
pattern in copper for my entry way area in our Hot Tub store. Always
looks great & no maintenance required. I believe it is made in Europe
as I recall. Lots of good colors & patterns to choose from too. I
think I may use it for the steps in my PT entry way.

Terry

Terry Neal
Bozeman, MT
82PT40
74FC34



Alan wrote:

> I just found a new flooring that is exactly what i've been looking for
> for my Bird. I am getting ready to do some remodeling. For the
> kitchen area i had decided to go with either a wood or a marble.
> ...But I didn't really want to use real wood or marble because of the
> thicknesses and weights involved. But on the other hand i don't like
> most of the fake woods or linoleum looks (at least for a higher end
> look).
>
> While at a Corner Bakery here in North Dallas last week (it was being
> remodeled), i kept noticing the floor. It looked very much like wood,
> but I wasn't sure and i didn't think they would put in real wood. The
> edges of each plank were beveled and there were no seams like in a
> linoleum type product. So today i went to the Home Depot Flooring
> Store and discovered a new (at least i had never seen it) product
> called Amtico. http://www.amtico.com It's not cheap, about $5/sf. But then
> i don't need a lot of it. They have some that look like woods.
> Others look like marble or tile. Best looking product i've seen. For
> "wood", it is sold in planks. Tiles are tile-size pieces. They also
> have decor pieces.
>
> Take a look if you're thinking about doing new floors.
>
> I'll also be replacing carpet. Any secrets you guys have discoved
> about doing that or choosing carpets that I need to know?
>
> Thanks,
> Alan 87FC35
>
>



[Non-text portions of this message have been removed]
Quote this message in a reply
12-19-2006, 14:58
Post: #3
A great new wood / tile flooring product. Perfect for RVs.
Alan, sounds great. Recently my neighbor, a fiberglass guy, worked on
a 42 Grand Banks traweler here and he installed a "feaux teak"
flooring product that really looked like the real deal. Texture very
similar to wood on one side, comes in strips that tongue and groove
together and could be cut with shears and a razor knife. It was a
rubber type product He cut it and glued it to the deck.It turned out
exceptionally good looking and really easy to work with. I would
think the biggest "issue" if there is one is the underlayment being
in good shape. But then again that would be the case in any event
regardless of what is used. I know how simple projects can turn into
major ordeals really quick.

Scott B
86FC35
SC
--- In WanderlodgeForum@yahoogroups.com, "Alan"
wrote:
>
> I just found a new flooring that is exactly what i've been looking
for
> for my Bird. I am getting ready to do some remodeling. For the
> kitchen area i had decided to go with either a wood or a marble.
> ...But I didn't really want to use real wood or marble because of
the
> thicknesses and weights involved. But on the other hand i don't
like
> most of the fake woods or linoleum looks (at least for a higher end
> look).
>
> While at a Corner Bakery here in North Dallas last week (it was
being
> remodeled), i kept noticing the floor. It looked very much like
wood,
> but I wasn't sure and i didn't think they would put in real wood.
The
> edges of each plank were beveled and there were no seams like in a
> linoleum type product. So today i went to the Home Depot Flooring
> Store and discovered a new (at least i had never seen it) product
> called Amtico. http://www.amtico.com It's not cheap, about $5/sf. But
then
> i don't need a lot of it. They have some that look like woods.
> Others look like marble or tile. Best looking product i've seen.
For
> "wood", it is sold in planks. Tiles are tile-size pieces. They
also
> have decor pieces.
>
> Take a look if you're thinking about doing new floors.
>
> I'll also be replacing carpet. Any secrets you guys have discoved
> about doing that or choosing carpets that I need to know?
>
> Thanks,
> Alan 87FC35
>
Quote this message in a reply
12-20-2006, 00:29
Post: #4
A great new wood / tile flooring product. Perfect for RVs.
Scott,

Did you or maybe could you get the info on that wood-like product/

Jim Riordan
'88 WLWB XXV
Stuart, Fl.



--- In WanderlodgeForum@yahoogroups.com, "Scott"
wrote:
>
> Alan, sounds great. Recently my neighbor, a fiberglass guy, worked
on
> a 42 Grand Banks traweler here and he installed a "feaux teak"
> flooring product that really looked like the real deal. Texture
very
> similar to wood on one side, comes in strips that tongue and groove
> together and could be cut with shears and a razor knife. It was a
> rubber type product He cut it and glued it to the deck.It turned
out
> exceptionally good looking and really easy to work with. I would
> think the biggest "issue" if there is one is the underlayment being
> in good shape. But then again that would be the case in any event
> regardless of what is used. I know how simple projects can turn
into
> major ordeals really quick.
>
> Scott B
> 86FC35
> SC
> --- In WanderlodgeForum@yahoogroups.com, "Alan"
> wrote:
> >
> > I just found a new flooring that is exactly what i've been
looking
> for
> > for my Bird. I am getting ready to do some remodeling. For the
> > kitchen area i had decided to go with either a wood or a marble.
> > ...But I didn't really want to use real wood or marble because of
> the
> > thicknesses and weights involved. But on the other hand i don't
> like
> > most of the fake woods or linoleum looks (at least for a higher
end
> > look).
> >
> > While at a Corner Bakery here in North Dallas last week (it was
> being
> > remodeled), i kept noticing the floor. It looked very much like
> wood,
> > but I wasn't sure and i didn't think they would put in real
wood.
> The
> > edges of each plank were beveled and there were no seams like in a
> > linoleum type product. So today i went to the Home Depot Flooring
> > Store and discovered a new (at least i had never seen it) product
> > called Amtico. http://www.amtico.com It's not cheap, about $5/sf. But
> then
> > i don't need a lot of it. They have some that look like woods.
> > Others look like marble or tile. Best looking product i've
seen.
> For
> > "wood", it is sold in planks. Tiles are tile-size pieces. They
> also
> > have decor pieces.
> >
> > Take a look if you're thinking about doing new floors.
> >
> > I'll also be replacing carpet. Any secrets you guys have discoved
> > about doing that or choosing carpets that I need to know?
> >
> > Thanks,
> > Alan 87FC35
> >
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)