Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Power Seat Motor
11-14-2006, 06:33
Post: #1
Power Seat Motor
Does anyone know where I might get a power seat motor. I have the unit
in hand several part #'s but no manufacturer name???

Jim Riordan
88 WLWB XXV
Quote this message in a reply
05-17-2010, 23:59
Post: #2
Power Seat Motor
I'm looking for a replacement motor for the drivers seat. Anyone have any idea
where I can get one. Thanks

Kip Henry
ATCKIP (WOG)
1988 PT40
Brooks, GA
Quote this message in a reply
05-18-2010, 03:19
Post: #3
Power Seat Motor
Kip,
I think there is an entry in the Parts Database for power seat parts. Go to that Database and search on power seat.
Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX

Sent from my iPhone
On May 18, 2010, at 6:59 AM, ""kiphenry@bellsouth.net"" <"kiphenry@bellsouth.net"> wrote:




I'm looking for a replacement motor for the drivers seat. Anyone have any idea where I can get one. Thanks



Kip Henry

ATCKIP (WOG)

1988 PT40

Brooks, GA




Quote this message in a reply
05-19-2010, 04:36
Post: #4
Power Seat Motor
I have replaced the seats in my FC 35 and they were both working fine-can't remember the make but they were original. If you are interested, I will make you a deal on both of them. Plenty of spare parts. Hope you are close by NW Ohio. Would be $$ to ship them. Rick in Ohio

--- On Tue, 5/18/10, kiphenry@... wrote:

From: kiphenry@...
Subject: [WanderlodgeForum] power seat motor
To: WanderlodgeForum@yahoogroups.com
Date: Tuesday, May 18, 2010, 7:59 AM


I'm looking for a replacement motor for the drivers seat. Anyone have any idea where I can get one. Thanks

Kip Henry
ATCKIP (WOG)
1988 PT40
Brooks, GA

Quote this message in a reply
05-19-2010, 05:42
Post: #5
Power Seat Motor

Rick,

I need a wiring harness, switch to the
motor. The plastic ends on the copilot seat are broken on mine. Challenge to
keep attached.

Thanks

Steve
Quandt

1993 PT-40

Iron Mountain, MI



From:
WanderlodgeForum@yahoogroups.com [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Rick Gunther

Sent: Wednesday, May 19, 2010
11:37 AM

To:
WanderlodgeForum@yahoogroups.com

Subject: Re: [WanderlodgeForum]
power seat motor

I have replaced the seats in my FC 35 and they were
both working fine-can't remember the make but they were original. If you are
interested, I will make you a deal on both of them. Plenty of spare parts.
Hope you are close by NW Ohio. Would be $$ to ship them. Rick in Ohio



--- On Tue, 5/18/10, kiphenry@bellsouth.net
net>

wrote:



From: kiphenry@bellsouth.net net>

Subject: [WanderlodgeForum] power seat motor

To: WanderlodgeForum@yahoogroups.com

Date: Tuesday, May 18, 2010, 7:59 AM

I'm looking for a
replacement motor for the drivers seat. Anyone have any idea where I can get
one. Thanks



Kip Henry

ATCKIP (WOG)

1988 PT40

Brooks, GA



Quote this message in a reply
05-19-2010, 08:19
Post: #6
Power Seat Motor
my passenger seat is inop....nothing happens when I push seat switch........any
suggestions on where to start.......steps to take??
Thanks.

Hank Hannigan
90SP36

--- In WanderlodgeForum@yahoogroups.com, "smquandt" wrote:
>
> Rick,
>
>
>
> I need a wiring harness, switch to the motor. The plastic ends on the
> copilot seat are broken on mine. Challenge to keep attached.
>
>
>
> Thanks
>
> Steve Quandt
>
> 1993 PT-40
>
> Iron Mountain, MI
>
>
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Rick Gunther
> Sent: Wednesday, May 19, 2010 11:37 AM
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] power seat motor
>
>
>
>
>
>
> I have replaced the seats in my FC 35 and they were both working fine-can't
> remember the make but they were original. If you are interested, I will make
> you a deal on both of them. Plenty of spare parts. Hope you are close by NW
> Ohio. Would be $$ to ship them. Rick in Ohio
>
> --- On Tue, 5/18/10, kiphenry@... wrote:
>
>
> From: kiphenry@...
> Subject: [WanderlodgeForum] power seat motor
> To: WanderlodgeForum@yahoogroups.com
> Date: Tuesday, May 18, 2010, 7:59 AM
>
>
>
> I'm looking for a replacement motor for the drivers seat. Anyone have any
> idea where I can get one. Thanks
>
> Kip Henry
> ATCKIP (WOG)
> 1988 PT40
> Brooks, GA
>
Quote this message in a reply
05-19-2010, 08:25
Post: #7
Power Seat Motor

Hank,
Did it work last time your were in the States? May be nothing more than the wires from the chassis to the seat controls came unplugged.
Gary
SOB
From: "hank_87us@yahoo.com"
Sent: Wednesday, May 19, 2010 4:19 PM
To: "WanderlodgeForum@yahoogroups.com"
Subject: [WanderlodgeForum] Re: power seat motor


my passenger seat is inop....nothing happens when I push seat switch........any suggestions on where to start.......steps to take??
Thanks.

Hank Hannigan
90SP36

--- In "WanderlodgeForum@yahoogroups.com", "smquandt" wrote:
>
> Rick,
>
>
>
> I need a wiring harness, switch to the motor. The plastic ends on the
> copilot seat are broken on mine. Challenge to keep attached.
>
>
>
> Thanks
>
> Steve Quandt
>
> 1993 PT-40
>
> Iron Mountain, MI
>
>
>
> _____
>
> From: "WanderlodgeForum%40yahoogroups.com"
> [mailto:"WanderlodgeForum%40yahoogroups.com"] On Behalf Of Rick Gunther
> Sent: Wednesday, May 19, 2010 11:37 AM
> To: "WanderlodgeForum%40yahoogroups.com"
> Subject: Re: [WanderlodgeForum] power seat motor
>
>
>
>
>
>
> I have replaced the seats in my FC 35 and they were both working fine-can't
> remember the make but they were original. If you are interested, I will make
> you a deal on both of them. Plenty of spare parts. Hope you are close by NW
> Ohio. Would be $$ to ship them. Rick in Ohio
>
> --- On Tue, 5/18/10, kiphenry@... wrote:
>
>
> From: kiphenry@...
> Subject: [WanderlodgeForum] power seat motor
> To: "WanderlodgeForum%40yahoogroups.com"
> Date: Tuesday, May 18, 2010, 7:59 AM
>
>
>
> I'm looking for a replacement motor for the drivers seat. Anyone have any
> idea where I can get one. Thanks
>
> Kip Henry
> ATCKIP (WOG)
> 1988 PT40
> Brooks, GA
>


__________ Information from ESET NOD32 Antivirus, version of virus signature database 5130 (20100519) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com




__________ Information from ESET NOD32 Antivirus, version of virus signature database 5130 (20100519) __________



The message was checked by ESET NOD32 Antivirus.



http://www.eset.com
Quote this message in a reply
05-19-2010, 12:45
Post: #8
Power Seat Motor
You can call me cel number is 419 345 0060

--- On Wed, 5/19/10, Gary Smith wrote:

From: Gary Smith Subject: Re: [WanderlodgeForum] Re: power seat motor
To: WanderlodgeForum@yahoogroups.com
Date: Wednesday, May 19, 2010, 4:25 PM


Hank,
Did it work last time your were in the States? May be nothing more than the wires from the chassis to the seat controls came unplugged.
Gary
SOB
From: HANK
Sent: Wednesday, May 19, 2010 4:19 PM
Subject: [WanderlodgeForum] Re: power seat motor
my passenger seat is inop....nothing happens when I push seat switch...... ..any suggestions on where to start....... steps to take??
Thanks.

Hank Hannigan
90SP36

--- In WanderlodgeForum@ yahoogroups. com, "smquandt" wrote:
>
> Rick,
>
>
>
> I need a wiring harness, switch to the motor. The plastic ends on the
> copilot seat are broken on mine. Challenge to keep attached.
>
>
>
> Thanks
>
> Steve Quandt
>
> 1993 PT-40
>
> Iron Mountain, MI
>
>
>
> _____
>
> From: WanderlodgeForum@ yahoogroups. com
> [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf Of Rick Gunther
> Sent: Wednesday, May 19, 2010 11:37 AM
> To: WanderlodgeForum@ yahoogroups. com
> Subject: Re: [WanderlodgeForum] power seat motor
>
>
>
>
>
>
> I have replaced the seats in my FC 35 and they were both working fine-can't
> remember the make but they were original. If you are interested, I will make
> you a deal on both of them. Plenty of spare parts. Hope you are close
by NW
> Ohio. Would be $$ to ship them. Rick in Ohio
>
> --- On Tue, 5/18/10, kiphenry@... wrote:
>
>
> From: kiphenry@...
> Subject: [WanderlodgeForum] power seat motor
> To: WanderlodgeForum@ yahoogroups. com
> Date: Tuesday, May 18, 2010, 7:59 AM
>
>
>
> I'm looking for a replacement motor for the drivers seat. Anyone have any
> idea where I can get one. Thanks
>
> Kip Henry
> ATCKIP (WOG)
> 1988 PT40
> Brooks, GA
>


__________ Information from ESET NOD32 Antivirus, version of virus signature database 5130 (20100519) __________

The message was checked by ESET NOD32
Antivirus.

http://www.eset. com


__________ Information from ESET NOD32 Antivirus, version of virus signature database 5130 (20100519) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset. com
Quote this message in a reply
05-19-2010, 18:52
Post: #9
Power Seat Motor
gARY:
I'm still in OZ but plan to return in July and the seat stopped working before
we left. Nothing happens when I hit the switch. I did a cursory look but
that's it. With all this talk on the subject, I thought I'd ask the question.
Usually on BIRDS, the FIX is something simple.

Regards,
Hank
90SP36 stored near san fran

--- In WanderlodgeForum@yahoogroups.com, "Gary Smith" wrote:
>
> Hank,
> Did it work last time your were in the States? May be nothing more than the
wires from the chassis to the seat controls came unplugged.
> Gary
> SOB
>
>
> From: HANK
> Sent: Wednesday, May 19, 2010 4:19 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: [WanderlodgeForum] Re: power seat motor
>
>
>
> my passenger seat is inop....nothing happens when I push seat
switch........any suggestions on where to start.......steps to take??
> Thanks.
>
> Hank Hannigan
> 90SP36
>
> --- In WanderlodgeForum@yahoogroups.com, "smquandt" wrote:
> >
> > Rick,
> >
> >
> >
> > I need a wiring harness, switch to the motor. The plastic ends on the
> > copilot seat are broken on mine. Challenge to keep attached.
> >
> >
> >
> > Thanks
> >
> > Steve Quandt
> >
> > 1993 PT-40
> >
> > Iron Mountain, MI
> >
> >
> >
> > _____
> >
> > From: WanderlodgeForum@yahoogroups.com
> > [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Rick Gunther
> > Sent: Wednesday, May 19, 2010 11:37 AM
> > To: WanderlodgeForum@yahoogroups.com
> > Subject: Re: [WanderlodgeForum] power seat motor
> >
> >
> >
> >
> >
> >
> > I have replaced the seats in my FC 35 and they were both working fine-can't
> > remember the make but they were original. If you are interested, I will make
> > you a deal on both of them. Plenty of spare parts. Hope you are close by NW
> > Ohio. Would be $$ to ship them. Rick in Ohio
> >
> > --- On Tue, 5/18/10, kiphenry@ wrote:
> >
> >
> > From: kiphenry@
> > Subject: [WanderlodgeForum] power seat motor
> > To: WanderlodgeForum@yahoogroups.com
> > Date: Tuesday, May 18, 2010, 7:59 AM
> >
> >
> >
> > I'm looking for a replacement motor for the drivers seat. Anyone have any
> > idea where I can get one. Thanks
> >
> > Kip Henry
> > ATCKIP (WOG)
> > 1988 PT40
> > Brooks, GA
> >
>
>
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature
database 5130 (20100519) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature
database 5130 (20100519) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)