Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Over heating -- followup and question
09-10-2006, 14:46
Post: #25
Over heating -- followup and question
Gotcha. Thanks

Leroy Eckert
1990 WB-40
Niceville, FL




----- Original Message -----
From: Mike Hohnstein
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, September 10, 2006 8:34 PM
Subject: Re: [WanderlodgeForum] Over heating -- followup and question


Yeah? Why's that? You know something I've missed?
I suggested BRAKE KLEEN, not carb cleaner. That stuff might even get the
urathane to lift.
MH
----- Original Message -----
From: Leroy Eckert
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, September 10, 2006 8:13 PM
Subject: Re: [WanderlodgeForum] Over heating -- followup and question

Mike-- that is the cleaner that has acetone, MEK and other goodies in a spray
can available at WalMart or NAPA right?
Just do no not get it on the paint.

Leroy Eckert
1990WB-40
Niceville, FL
----- Original Message -----
From: Mike Hohnstein
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, September 10, 2006 7:40 PM
Subject: Re: [WanderlodgeForum] Over heating -- followup and question

Douche that bad boy with Brake Kleen, not the safe stuff, the evil old
fashoned kind that really works. A case should do the trick and it WILL clean
out any thing.
MH
----- Original Message -----
From: Rob Robinson
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, September 10, 2006 7:29 PM
Subject: Re: [WanderlodgeForum] Over heating -- followup and question

Leroy I too cleaned my radiator recently and did the best I could without
taking the thing out. I noticed some paint had flaked off but opted not to
repaint because even though I cleaned it out as best I could I am not
confident that it is clean enough to paint. I'd be worried the paint would
combine with any dirt/soap residue left behind and clog the fins up.

On 10/09/06, Leroy Eckert wrote:
>
> David:
> Thanks, seems reasonable. After Pete posted his problem I checked mine out
> even though I do not have overtemp problems. The last time I cleaned my the
> radiator was 18,000 miles ago. I washed it out this weekend and was amazed
> at how much black water came out of the oil cooler, condenser and radiator.
> The bus gets dirty with road film from the rain and all of that crud is
> sucked into the radiator by the fan. I will repaint my radiator black next
> weekend. The condenser and oil cooler are not painted?? Any ideas on that???
>
> Leroy Eckert
> 1990 WB-40
> Niceville, FL
>
> ----- Original Message -----
> From: David Brady
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, September 10, 2006 5:26 PM
> Subject: Re: [WanderlodgeForum] Over heating -- followup and question
>
> They paint them black for the same reason that disc brake
> calipers are painted black - heat radiation. Everything radiates
> heat in the form of electromagnetic waves (energy). The ideal
> is Black Body Radiation. The emissivity of a painted black
> object radiates more like an ideal Black Body than other painted
> colors.
>
> David B
> '02 LXi Smokey
> Va
>
> Pete Masterson wrote:
> >
> > The radiator was painted. And I noticed that they paint all the
> > radiators in their shop that they're servicing ... there was a rack
> > with a bunch of radiators that were just painted... I saw that they
> > have a fan blowing air through the newly painted radiators ...
> > probably to keep the paint from clogging the air passages.
> >
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>

--
Rob, Sue & Merlin Robinson
94 WLWB

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
Over heating -- followup and question - krminyl@... - 09-08-2006, 06:35
Over heating -- followup and question - Pete Masterson - 09-08-2006, 10:12
Over heating -- followup and question - Leroy Eckert - 09-08-2006, 11:02
Over heating -- followup and question - Jerry - 09-08-2006, 11:06
Over heating -- followup and question - Pete Masterson - 09-08-2006, 11:33
Over heating -- followup and question - Pete Masterson - 09-08-2006, 12:20
Over heating -- followup and question - Mike Hohnstein - 09-08-2006, 12:46
Over heating -- followup and question - Tom Warner - 09-08-2006, 12:56
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 08:56
Over heating -- followup and question - Pete Masterson - 09-10-2006, 09:07
Over heating -- followup and question - David Brady - 09-10-2006, 10:26
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 11:41
Over heating -- followup and question - Rob Robinson - 09-10-2006, 12:29
Over heating -- followup and question - David Brady - 09-10-2006, 12:33
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 12:40
Over heating -- followup and question - Curt Sprenger - 09-10-2006, 12:51
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 12:54
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:07
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:13
Over heating -- followup and question - Pete Masterson - 09-10-2006, 13:24
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 13:31
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 13:34
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 14:33
Over heating -- followup and question - Curt Sprenger - 09-10-2006, 14:46
Over heating -- followup and question - Leroy Eckert - 09-10-2006 14:46
Over heating -- followup and question - Pete Masterson - 09-10-2006, 14:51
Over heating -- followup and question - Leroy Eckert - 09-10-2006, 15:16
Over heating -- followup and question - Mike Hohnstein - 09-10-2006, 16:14
Over heating -- followup and question - Gregory OConnor - 09-10-2006, 17:42
Over heating -- followup and question - David Brady - 09-11-2006, 02:30



User(s) browsing this thread: 1 Guest(s)