Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacement Generator
05-15-2005, 01:30
Post: #21
Replacement Generator
Water cooled in a box, can't make out what "pacific rim" entity crafted the 3
cyl diesel. It works.
----- Original Message -----
From: randydupree
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, May 15, 2005 8:01 AM
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator


water cooled onan or air?
----- Original Message -----
From: Mike Hohnstein
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, May 15, 2005 8:29 AM
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator


That's inspiring, I felt guilt because the truck genset has 200+ hrs since
oil change. I might stretch it as I don't like the Genewreck that much anyhow.
On the other hand a friend of mine lost a rod bearing on his 7.5 Onan at 6000
hrs and I doubt he changed the oil on time.
Mike Hohnstein
Germantown, WI
83FC35
----- Original Message -----
From: randydupree
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, May 15, 2005 7:05 AM
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator


i have a buddy with some semis,they haul frozen foods in a refer
trailer,they change oil at 1000 hours in the engine on the refer unit.it never
shuts down...its about the same tupe deal we have,4 cyl diesel engine,it does
have a bigger oil pan,it holds more oil..i run my genny for days on end,and i
never service it while on the road,the oil level never drops so i don't worrie
about it..almost 6000 hours on mine,and if it blows up,i'm going to powertech
and buy a new one!! randydupree93wb
----- Original Message -----
From: Jay Darst
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, May 14, 2005 10:45 PM
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator


Me too, Randy. Do you think 336 hours on that oil change was a
stretch?

I think the start-up warm-up, cool off, start-up warm-up, cool off,
start-up warm-up, cool off, start-up warm-up, cool off, start-up
warm-up, cool off, start-up warm-up, cool off has GOT to be the
reason for oil changes. You know, fire it up-make coffee-shut it
off. Thats what is hard on things.

You using a Perkins/Kohler?

Jay Darst
85PT40SPRINGFIELDIL


--- In WanderlodgeForum@yahoogroups.com, randydupree
wrote:
> i've run my genny for 14 days without shutting it down,i like a.c.
and ice cubes! randydupree93wb
> ----- Original Message -----
> From: Jay Darst
> To: WanderlodgeForum@yahoogroups.com
> Sent: Saturday, May 14, 2005 10:32 PM
> Subject: Re: Fw: [WanderlodgeForum] Replacement Generator
>
>
> I run my generator as much as possible. Have run it NON-Stop for
4
> days (96 hours). I usually like to change the oil every 50
hours,
> but in an event that causes the Perkins to run straight thru an
> extended period, I'll wait til I'm ready to shut it off.
>
> It is my understanding that this Perkins engine has been used in
> many a sail boat around the world. They have seen 12K-20K of run
> time. Albeit its not started to bre a cup of coffee, more like
> doldrums and then lit for days or even weeks sometimes...
>
> So far, I'm happy with my boat anchor. Werks Grate!
>
> Jay Darst
> 85PT40
> SPRINGFIELDIL
>
>
> --- In WanderlodgeForum@yahoogroups.com, Tom Warner

> wrote:
> > Different strokes for different folks. The perkins is a far
more
> expensive
> > unit then anything you could replace it with and it is more
> ruggedly built
> > for severe service. I cant for the life of me understand why
> people think
> > newer is better. Exactly what dont you like about the Perkins
that
> you
> > found in what ever you got that replaced it? Mine has 2400
hours
> on it and
> > is just broken in.
> >
> > tom
> > 1982 FC35
> > Vernon Center,NY
> >
> >
> > dAt 07:15 PM 5/14/2005 -0700, you wrote:
> >
> > >Perkins are boat anchors. I refuse to own one.
> > >
> > >Blair in Oregon
> > >
> > >
> > >
> > >At 06:58 PM 5/14/2005, you wrote:
> > >
> > >
> > > >Sent: Saturday, May 14, 2005 7:41 PM
> > > >Subject: [WanderlodgeForum] Replacement Generator
> > > >
> > > >Jeff I had the same problem with my old perkins with the
oil
> seal it turn
> > > >out that the crank shaft was going to have to be replaced
or
> built back up.
> > > >I decided to replace the hole generator with a new 12 KW
power
> teck.I
> > > >personly preferd the power teck with a Kubota engin over
the
> old worn out
> > > >perkins engin.The power teck has no slip rings or brushes.
> > > > Bob Loomas 1985 PT 36
> > > >
> > > >
> > > >
> > > >Today while removing the Perkins motor to replace the seals
on
> it we
> > > >got to thinking, does it pay to even do the job on a
generator
> with
> > > >more than 5500 hours on it? We wonder if all we will be
doing
> is fixing
> > > >this thing, and would the money be better spent in the
purchase
> of a
> > > >new Onan 8000 quiet deisel? Is this a good route to go and
is a
> 8000
> > > >big enough, its 240 pounds lighter than a 10,000 or a
12,500
> watt Onan.
> > > >Will it fit in the tray and can it be wired into the coach
as
> it is?
> > > >Looking for comments & suggestions by those who have made
this
> move.
> > > >
> > > >Jeff & Michelle August
> > > >1980 FC35RB
> > > >Plymouth, WI
> > > >
> > > >
> > > >
> > > >
> > > >------------------------------------------------------------
----
> ---------
> > > -------
> > > >Yahoo! Groups Links
> > > >
> > > > a.. To visit your group on the web, go to:
> > > >
> > >
>
><<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yaho
> o.com
> >
>
> /group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeF
> orum/
> > > >
> > > > b.. To unsubscribe from this group, send an email to:
> > > > WanderlodgeForum-unsubscribe@yahoogroups.com
> > > >
> > > > c.. Your use of Yahoo! Groups is subject to the Yahoo!
Terms
> of Service.
> > > >
> > > >
> > > >
> > > >[Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > >----------
> > > >Yahoo! Groups Links
> > > > * To visit your group on the web, go to:
> > > > *
> > > >
> > >
>
<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo
> .com/group/WanderlodgeForum/>http://groups.yahoo.com/group/Wander
lodg
> eForum/
> > >
> > > >
> > > > *
> > > > * To unsubscribe from this group, send an email to:
> > > > *
> > > >
> > > > subject=Unsubscribe>WanderlodgeForum-unsubscribe@yahoogroups.com
> > >
> > > >
> > > > *
> > > > * Your use of Yahoo! Groups is subject to the
> > > >
> > >
>
<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/
> >Yahoo!
> > > Terms of Service.
> > >
> > >
> > >[Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >----------
> > >Yahoo! Groups Links
> > > * To visit your group on the web, go to:
> > > *
> > >
>
<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.
> com/group/WanderlodgeForum/
> > >
> > > *
> > > * To unsubscribe from this group, send an email to:
> > > *
> > > > subject=Unsubscribe>WanderlodgeForum-unsubscribe@yahoogroups.com
> > >
> > > *
> > > * Your use of Yahoo! Groups is subject to the
> > > <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
>
>
>
> -------------------------------------------------------------------
-----------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/WanderlodgeForum/
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
>
> [Non-text portions of this message have been removed]





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



[Non-text portions of this message have been removed]




------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
Quote this message in a reply
05-15-2005, 01:47
Post: #22
Replacement Generator
Some quick comments.

I have about 30 years experience around big coaches with diesel generators. In
the early
years, these gensets were virtually all Perkins powered. Later, Yamar has been
the little
diesel engine of choice. Anyway, both brands have been almost bullet-proof from
the
reliability standpoint. In addition, they are long-lived to the point that very
few get to the
point of needing overhaul or replacement. I'd guess that in most cases, 10,000
hours is
attainable, maybe more.

Regarding oil change intervals, how about doing oil sampling to validate
extended change
intervals rather than guessing? I think any large generator or truck shop can
take periodic
samples and send them to a good lab until you validate an extended interval. I'd
also
suggest using a major brand diesel synthetic lube oil like Mobil Delvac 1 if
you're going for
extended change intervals.

Beancounterman

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein" <MHOHNSTEIN@w...>
wrote:
> That's inspiring, I felt guilt because the truck genset has 200+ hrs since oil
change. I
might stretch it as I don't like the Genewreck that much anyhow. On the other
hand a
friend of mine lost a rod bearing on his 7.5 Onan at 6000 hrs and I doubt he
changed the
oil on time.
> Mike Hohnstein
> Germantown, WI
> 83FC35
> ----- Original Message -----
> From: randydupree
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, May 15, 2005 7:05 AM
> Subject: Re: Fw: [WanderlodgeForum] Replacement Generator
>
>
> i have a buddy with some semis,they haul frozen foods in a refer
trailer,they change oil
at 1000 hours in the engine on the refer unit.it never shuts down...its about
the same tupe
deal we have,4 cyl diesel engine,it does have a bigger oil pan,it holds more
oil..i run my
genny for days on end,and i never service it while on the road,the oil level
never drops so i
don't worrie about it..almost 6000 hours on mine,and if it blows up,i'm going to
powertech and buy a new one!! randydupree93wb
> ----- Original Message -----
> From: Jay Darst
> To: WanderlodgeForum@yahoogroups.com
> Sent: Saturday, May 14, 2005 10:45 PM
> Subject: Re: Fw: [WanderlodgeForum] Replacement Generator
>
>
> Me too, Randy. Do you think 336 hours on that oil change was a
> stretch?
>
> I think the start-up warm-up, cool off, start-up warm-up, cool off,
> start-up warm-up, cool off, start-up warm-up, cool off, start-up
> warm-up, cool off, start-up warm-up, cool off has GOT to be the
> reason for oil changes. You know, fire it up-make coffee-shut it
> off. Thats what is hard on things.
>
> You using a Perkins/Kohler?
>
> Jay Darst
> 85PT40SPRINGFIELDIL
Quote this message in a reply
05-15-2005, 02:12
Post: #23
Replacement Generator
Jeff,

Here are some of my thoughts... Most generators fail because of
non-use. According to the figures you gave, your generator has been
used for a total of 5500 hours in 25 years which averages out to 18
hours per month. Not a bad usage factor if it was uniform, however, I
would assume that your generator, like most, had long periods of
non-use. Mechanical equipment tends to fail more from non-use than
heavy use. When an engine sits, seals dry out, get hard, and take a
set which then leak.

The Perkins engine has been used in industrial applications for many
years and has a good reputation, better than the Onan generators,
though the Diesel Onans seem to be better than the gas driven. Again,
most of these problems come from non-use.

That Perkins that you have, if used and serviced regularly should give
you over 30,000 hours of service. IF you are determined to change, I
would consider either the Power Tech, made in FL or the WRICO made in
Eugene, OR. Both are of excellent quality and are good for at least
30,000 hours if exercised regularly. RVers tend to "save their
generators" by not using them and when needed the generator is not
their for them.

It is your money, but I suggest you talk to the experts in the field,
Dick Wright of Wrico or the owner of Power Tech. I think they will
both tell you to replace the seals and USE your Perkins powered generator.

George Lowry
'95 WBDA 4203 & GM 4106 (for sale)
Spearfish, SD

Jeff August wrote:
> Today while removing the Perkins motor to replace the seals on it we
> got to thinking, does it pay to even do the job on a generator with
> more than 5500 hours on it? We wonder if all we will be doing is fixing
> this thing, and would the money be better spent in the purchase of a
> new Onan 8000 quiet deisel? Is this a good route to go and is a 8000
> big enough, its 240 pounds lighter than a 10,000 or a 12,500 watt Onan.
> Will it fit in the tray and can it be wired into the coach as it is?
> Looking for comments & suggestions by those who have made this move.
>
> Jeff & Michelle August
> 1980 FC35RB
> Plymouth, WI
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
Quote this message in a reply
05-15-2005, 02:13
Post: #24
Replacement Generator
oil samples! heres a good story on that,on the TDR forum a guy bought a new
dodge diesel truck,and he decided to send oil samples off instead of changing
oil every 3000 miles or so,so,he sends 3 samples off every time to 3 different
places to get them analized,blackstone labs,cat and another one.all 3 came back
everytime with three completely different reports,none of them were the same,not
even close.this thread went on for years,up to 20,000 miles on the truck before
the guy gave up.he said that its way better to change your oil and trust that
the new oil was good rather than trust the labs to do it right and get you back
the results from your oil,not someone else's..i change my oil.its way cheaper in
the end,IMHO....randydupree93wb
----- Original Message -----
From: beancounterman
To: WanderlodgeForum@yahoogroups.com
Sent: Sunday, May 15, 2005 9:47 AM
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator


Some quick comments.

I have about 30 years experience around big coaches with diesel generators.
In the early
years, these gensets were virtually all Perkins powered. Later, Yamar has been
the little
diesel engine of choice. Anyway, both brands have been almost bullet-proof
from the
reliability standpoint. In addition, they are long-lived to the point that
very few get to the
point of needing overhaul or replacement. I'd guess that in most cases, 10,000
hours is
attainable, maybe more.

Regarding oil change intervals, how about doing oil sampling to validate
extended change
intervals rather than guessing? I think any large generator or truck shop can
take periodic
samples and send them to a good lab until you validate an extended interval.
I'd also
suggest using a major brand diesel synthetic lube oil like Mobil Delvac 1 if
you're going for
extended change intervals.

Beancounterman

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein" <MHOHNSTEIN@w...>
wrote:
> That's inspiring, I felt guilt because the truck genset has 200+ hrs since
oil change. I
might stretch it as I don't like the Genewreck that much anyhow. On the other
hand a
friend of mine lost a rod bearing on his 7.5 Onan at 6000 hrs and I doubt he
changed the
oil on time.
> Mike Hohnstein
> Germantown, WI
> 83FC35
> ----- Original Message -----
> From: randydupree
> To: WanderlodgeForum@yahoogroups.com
> Sent: Sunday, May 15, 2005 7:05 AM
> Subject: Re: Fw: [WanderlodgeForum] Replacement Generator
>
>
> i have a buddy with some semis,they haul frozen foods in a refer
trailer,they change oil
at 1000 hours in the engine on the refer unit.it never shuts down...its about
the same tupe
deal we have,4 cyl diesel engine,it does have a bigger oil pan,it holds more
oil..i run my
genny for days on end,and i never service it while on the road,the oil level
never drops so i
don't worrie about it..almost 6000 hours on mine,and if it blows up,i'm going
to
powertech and buy a new one!! randydupree93wb
> ----- Original Message -----
> From: Jay Darst
> To: WanderlodgeForum@yahoogroups.com
> Sent: Saturday, May 14, 2005 10:45 PM
> Subject: Re: Fw: [WanderlodgeForum] Replacement Generator
>
>
> Me too, Randy. Do you think 336 hours on that oil change was a
> stretch?
>
> I think the start-up warm-up, cool off, start-up warm-up, cool off,
> start-up warm-up, cool off, start-up warm-up, cool off, start-up
> warm-up, cool off, start-up warm-up, cool off has GOT to be the
> reason for oil changes. You know, fire it up-make coffee-shut it
> off. Thats what is hard on things.
>
> You using a Perkins/Kohler?
>
> Jay Darst
> 85PT40SPRINGFIELDIL





------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
Quote this message in a reply
05-15-2005, 02:20
Post: #25
Replacement Generator
Got to agree that Yanmar puts out a heck of an engine. I have one of
their tractors (which is a red John Deere). Yep, Yanmar makes tractors
for Deere. It is powerful for a small tractor, runs all day of very
little fuel and once I got rid of that puny Japanese battery and put
in a group 24, starts every time even after sitting for months.

If I was buying new and had a choice, I would but the Yanmar, but my
experience with the Perkins has also been good.

George Lowry
'95 WBDA 4203 & GM 4106 (for sale)
Spearfish, SD

Blair wrote:

> You're lucky.... For every Yanmar engine that I've see with problems, you
> see a
> hundred Perkins....
>
> Blair in Oregon
>
>
>
> At 07:23 PM 5/14/2005, you wrote:
>
>>Different strokes for different folks. The perkins is a far more expensive
>>unit then anything you could replace it with and it is more ruggedly built
>>for severe service. I cant for the life of me understand why people think
>>newer is better. Exactly what dont you like about the Perkins that you
>>found in what ever you got that replaced it? Mine has 2400 hours on it and
>>is just broken in.
>>
>>tom
>>1982 FC35
>>Vernon Center,NY
>>
>>
>>dAt 07:15 PM 5/14/2005 -0700, you wrote:
>>
>>
>>>Perkins are boat anchors. I refuse to own one.
>>>
>>>Blair in Oregon
>>>
>>>
>>>
>>>At 06:58 PM 5/14/2005, you wrote:
>>>
>>>
>>>
>>>>Sent: Saturday, May 14, 2005 7:41 PM
>>>>Subject: [WanderlodgeForum] Replacement Generator
>>>>
>>>>Jeff I had the same problem with my old perkins with the oil seal it turn
>>>>out that the crank shaft was going to have to be replaced or built
>>
>>back up.
>>
>>>>I decided to replace the hole generator with a new 12 KW power teck.I
>>>>personly preferd the power teck with a Kubota engin over the old worn out
>>>>perkins engin.The power teck has no slip rings or brushes.
>>>> Bob Loomas 1985 PT 36
>>>>
>>>>
>>>>
>>>>Today while removing the Perkins motor to replace the seals on it we
>>>>got to thinking, does it pay to even do the job on a generator with
>>>>more than 5500 hours on it? We wonder if all we will be doing is fixing
>>>>this thing, and would the money be better spent in the purchase of a
>>>>new Onan 8000 quiet deisel? Is this a good route to go and is a 8000
>>>>big enough, its 240 pounds lighter than a 10,000 or a 12,500 watt Onan.
>>>>Will it fit in the tray and can it be wired into the coach as it is?
>>>>Looking for comments & suggestions by those who have made this move.
>>>>
>>>>Jeff & Michelle August
>>>>1980 FC35RB
>>>>Plymouth, WI
>>>>
>>>>
>>>>
>>>>
>>>>-------------------------------------------------------------------------
>>>
>>>-------
>>>
>>>>Yahoo! Groups Links
>>>>
>>>> a.. To visit your group on the web, go to:
>>>>
>>>><<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.
>>
>>com/group/WanderlodgeForum/>http://groups.yahoo.com
>>
>>/group/WanderlodgeForum/><http://groups.yahoo.com/group/WanderlodgeForum/>http\
://groups.yahoo.com/group/WanderlodgeForum/
>>
>>>> b.. To unsubscribe from this group, send an email to:
>>>> WanderlodgeForum-unsubscribe@yahoogroups.com
>>>>
>>>> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>>
>>Service.
>>
>>>>
>>>>
>>>>[Non-text portions of this message have been removed]
>>>>
>>>>
>>>>
>>>>----------
>>>>Yahoo! Groups Links
>>>> * To visit your group on the web, go to:
>>>> *
>>>>
>>>
>><<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/gro\
up/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>http://grou\
ps.yahoo.com/group/WanderlodgeForum/
>>
>>
>>>> *
>>>> * To unsubscribe from this group, send an email to:
>>>> *
>>>>
>>>
>>Wande\
rlodgeForum-unsubscribe@yahoogroups.com
>>
>>
>>>> *
>>>> * Your use of Yahoo! Groups is subject to the
>>>>
>>>
>><<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>http://\
docs.yahoo.com/info/terms/>Yahoo!
>>
>>
>>>Terms of Service.
>>>
>>>
>>>[Non-text portions of this message have been removed]
>>>
>>>
>>>
>>>----------
>>>Yahoo! Groups Links
>>> * To visit your group on the web, go to:
>>> *
>>>
>>
>><<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/grou\
p/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/
>>
>>
>>> *
>>> * To unsubscribe from this group, send an email to:
>>> *
>>>
>>
>>Wande\
rlodgeForum-unsubscribe@yahoogroups.com
>>
>>
>>> *
>>> * Your use of Yahoo! Groups is subject to the
>>>
>>
>><<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Yahoo!
>>Terms of Service.
>>
>>
>>
>>
>>----------
>>Yahoo! Groups Links
>> * To visit your group on the web, go to:
>> *
>><http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group\
/WanderlodgeForum/
>>
>> *
>> * To unsubscribe from this group, send an email to:
>> *
>>Wande\
rlodgeForum-unsubscribe@yahoogroups.com
>>
>> *
>> * Your use of Yahoo! Groups is subject to the
>><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
Quote this message in a reply
05-15-2005, 02:29
Post: #26
Replacement Generator
George,
My experience with Perkins goes back 50 years to when it was the
engine of choice
as an auxiliary in sailboats. As a kid, I fondly remember the family and
friends trying
to get the blasted thing started.....lots of good blue language. All of
our boating friends
had the same problem....getting them started and then keeping them running.
Now, on a sailboat, if you can't get it started when you need it,
you can get in real
trouble very fast. A lot of cruises were cancelled for lack of a reliable
auxiliary. A genset
on a motorhome is not life threatening, while a faulty engine on a boat can
kill you.
Over the years, nothing has changed my mind about Perkins. Almost
all my boating
buddies canned them decades ago...besides, the Yanmar's don't leak and mark
their
territory like a Perkins. Reminds me of my old Norton Atlas.

Blair in soggy Oregon




At 07:20 AM 5/15/2005, you wrote:
>Got to agree that Yanmar puts out a heck of an engine. I have one of
>their tractors (which is a red John Deere). Yep, Yanmar makes tractors
>for Deere. It is powerful for a small tractor, runs all day of very
>little fuel and once I got rid of that puny Japanese battery and put
>in a group 24, starts every time even after sitting for months.
>
>If I was buying new and had a choice, I would but the Yanmar, but my
>experience with the Perkins has also been good.
>
>George Lowry
>'95 WBDA 4203 & GM 4106 (for sale)
>Spearfish, SD
>
>Blair wrote:
>
> > You're lucky.... For every Yanmar engine that I've see with problems,
> you
> > see a
> > hundred Perkins....
> >
> > Blair in Oregon
> >
> >
> >
> > At 07:23 PM 5/14/2005, you wrote:
> >
> >>Different strokes for different folks. The perkins is a far more expensive
> >>unit then anything you could replace it with and it is more ruggedly built
> >>for severe service. I cant for the life of me understand why people think
> >>newer is better. Exactly what dont you like about the Perkins that you
> >>found in what ever you got that replaced it? Mine has 2400 hours on it and
> >>is just broken in.
> >>
> >>tom
> >>1982 FC35
> >>Vernon Center,NY
> >>
> >>
> >>dAt 07:15 PM 5/14/2005 -0700, you wrote:
> >>
> >>
> >>>Perkins are boat anchors. I refuse to own one.
> >>>
> >>>Blair in Oregon
> >>>
> >>>
> >>>
> >>>At 06:58 PM 5/14/2005, you wrote:
> >>>
> >>>
> >>>
> >>>>Sent: Saturday, May 14, 2005 7:41 PM
> >>>>Subject: [WanderlodgeForum] Replacement Generator
> >>>>
> >>>>Jeff I had the same problem with my old perkins with the oil seal it turn
> >>>>out that the crank shaft was going to have to be replaced or built
> >>
> >>back up.
> >>
> >>>>I decided to replace the hole generator with a new 12 KW power teck.I
> >>>>personly preferd the power teck with a Kubota engin over the old worn out
> >>>>perkins engin.The power teck has no slip rings or brushes.
> >>>> Bob Loomas 1985 PT 36
> >>>>
> >>>>
> >>>>
> >>>>Today while removing the Perkins motor to replace the seals on it we
> >>>>got to thinking, does it pay to even do the job on a generator with
> >>>>more than 5500 hours on it? We wonder if all we will be doing is fixing
> >>>>this thing, and would the money be better spent in the purchase of a
> >>>>new Onan 8000 quiet deisel? Is this a good route to go and is a 8000
> >>>>big enough, its 240 pounds lighter than a 10,000 or a 12,500 watt Onan.
> >>>>Will it fit in the tray and can it be wired into the coach as it is?
> >>>>Looking for comments & suggestions by those who have made this move.
> >>>>
> >>>>Jeff & Michelle August
> >>>>1980 FC35RB
> >>>>Plymouth, WI
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>-------------------------------------------------------------------------
> >>>
> >>>-------
> >>>
> >>>>Yahoo! Groups Links
> >>>>
> >>>> a.. To visit your group on the web, go to:
> >>>>
> >>>><<<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yaho
> o.com/group/WanderlodgeForum/>http://groups.yahoo.
> >>
> >>com/group/WanderlodgeForum/><http://groups.yahoo.com>http://groups.yahoo
> .com
> >>
> >>/group/WanderlodgeForum/><<http://groups.yahoo.com/group/WanderlodgeForu
>
m/>http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group\
/WanderlodgeForum/
> >>
> >>>> b.. To unsubscribe from this group, send an email to:
> >>>> WanderlodgeForum-unsubscribe@yahoogroups.com
> >>>>
> >>>> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> >>
> >>Service.
> >>
> >>>>
> >>>>
> >>>>[Non-text portions of this message have been removed]
> >>>>
> >>>>
> >>>>
> >>>>----------
> >>>>Yahoo! Groups Links
> >>>> * To visit your group on the web, go to:
> >>>> *
> >>>>
> >>>
> >><<<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.
>
com/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>http\
://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group/Wander\
lodgeForum/
>
> >>
> >>
> >>>> *
> >>>> * To unsubscribe from this group, send an email to:
> >>>> *
> >>>>
> >>>
> >> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >>
> >>>> *
> >>>> * Your use of Yahoo! Groups is subject to the
> >>>>
> >>>
> >><<<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>
> http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Yahoo!
> >>
> >>
> >>>Terms of Service.
> >>>
> >>>
> >>>[Non-text portions of this message have been removed]
> >>>
> >>>
> >>>
> >>>----------
> >>>Yahoo! Groups Links
> >>> * To visit your group on the web, go to:
> >>> *
> >>>
> >>
> >><<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.c
>
om/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>http:\
//groups.yahoo.com/group/WanderlodgeForum/
>
> >>
> >>
> >>> *
> >>> * To unsubscribe from this group, send an email to:
> >>> *
> >>>
> >>
> >> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >>
> >>> *
> >>> * Your use of Yahoo! Groups is subject to the
> >>>
> >>
> >><<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>h
> ttp://docs.yahoo.com/info/terms/>Yahoo!
> >>Terms of Service.
> >>
> >>
> >>
> >>
> >>----------
> >>Yahoo! Groups Links
> >> * To visit your group on the web, go to:
> >> *
> >><<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.co
> m/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/
> >>
> >> *
> >> * To unsubscribe from this group, send an email to:
> >> *
> >> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >> *
> >> * Your use of Yahoo! Groups is subject to the
> >><<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Ya
> hoo! Terms of Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>----------
>Yahoo! Groups Links
> * To visit your group on the web, go to:
> *
>
<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group/W\
anderlodgeForum/
>
> *
> * To unsubscribe from this group, send an email to:
> *
>
Wanderl\
odgeForum-unsubscribe@yahoogroups.com
>
> *
> * Your use of Yahoo! Groups is subject to the
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
Quote this message in a reply
05-15-2005, 03:03
Post: #27
Replacement Generator
Blair,

As a former Perkins diesel powered trawler owner I can say that my Perkins
ran trouble free for years. Auxiliary engines in sailboats always fail
because sailors are purists and refuse to take care of the engine. Don'ts
put the blame for a failed engine on the brand, but rather on the care they
get. Sounds like you had a motor boat with a sail instead of a sailboat
with a motor. I enjoy your posts, but will disagree with you on his one.

Chet Geist
1981 FC 33, 3208 NA, 12.5 Perkins/Kohler
Austin, Texas
-----Original Message-----
From: WanderlodgeForum@yahoogroups.com
[mailto:WanderlodgeForum@yahoogroups.com]On Behalf Of Blair
Sent: Sunday, May 15, 2005 9:29 AM
To: WanderlodgeForum@yahoogroups.com
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator


George,
My experience with Perkins goes back 50 years to when it was the
engine of choice
as an auxiliary in sailboats. As a kid, I fondly remember the family and
friends trying
to get the blasted thing started.....lots of good blue language. All of
our boating friends
had the same problem....getting them started and then keeping them
running.
Now, on a sailboat, if you can't get it started when you need it,
you can get in real
trouble very fast. A lot of cruises were cancelled for lack of a
reliable
auxiliary. A genset
on a motorhome is not life threatening, while a faulty engine on a boat
can
kill you.
Over the years, nothing has changed my mind about Perkins. Almost
all my boating
buddies canned them decades ago...besides, the Yanmar's don't leak and
mark
their
territory like a Perkins. Reminds me of my old Norton Atlas.

Blair in soggy Oregon




At 07:20 AM 5/15/2005, you wrote:
>Got to agree that Yanmar puts out a heck of an engine. I have one of
>their tractors (which is a red John Deere). Yep, Yanmar makes tractors
>for Deere. It is powerful for a small tractor, runs all day of very
>little fuel and once I got rid of that puny Japanese battery and put
>in a group 24, starts every time even after sitting for months.
>
>If I was buying new and had a choice, I would but the Yanmar, but my
>experience with the Perkins has also been good.
>
>George Lowry
>'95 WBDA 4203 & GM 4106 (for sale)
>Spearfish, SD
>
>Blair wrote:
>
> > You're lucky.... For every Yanmar engine that I've see with
problems,
> you
> > see a
> > hundred Perkins....
> >
> > Blair in Oregon
> >
> >
> >
> > At 07:23 PM 5/14/2005, you wrote:
> >
> >>Different strokes for different folks. The perkins is a far more
expensive
> >>unit then anything you could replace it with and it is more ruggedly
built
> >>for severe service. I cant for the life of me understand why people
think
> >>newer is better. Exactly what dont you like about the Perkins that you
> >>found in what ever you got that replaced it? Mine has 2400 hours on it
and
> >>is just broken in.
> >>
> >>tom
> >>1982 FC35
> >>Vernon Center,NY
> >>
> >>
> >>dAt 07:15 PM 5/14/2005 -0700, you wrote:
> >>
> >>
> >>>Perkins are boat anchors. I refuse to own one.
> >>>
> >>>Blair in Oregon
> >>>
> >>>
> >>>
> >>>At 06:58 PM 5/14/2005, you wrote:
> >>>
> >>>
> >>>
> >>>>Sent: Saturday, May 14, 2005 7:41 PM
> >>>>Subject: [WanderlodgeForum] Replacement Generator
> >>>>
> >>>>Jeff I had the same problem with my old perkins with the oil seal it
turn
> >>>>out that the crank shaft was going to have to be replaced or built
> >>
> >>back up.
> >>
> >>>>I decided to replace the hole generator with a new 12 KW power
teck.I
> >>>>personly preferd the power teck with a Kubota engin over the old
worn out
> >>>>perkins engin.The power teck has no slip rings or brushes.
> >>>> Bob Loomas 1985 PT 36
> >>>>
> >>>>
> >>>>
> >>>>Today while removing the Perkins motor to replace the seals on it we
> >>>>got to thinking, does it pay to even do the job on a generator with
> >>>>more than 5500 hours on it? We wonder if all we will be doing is
fixing
> >>>>this thing, and would the money be better spent in the purchase of a
> >>>>new Onan 8000 quiet deisel? Is this a good route to go and is a 8000
> >>>>big enough, its 240 pounds lighter than a 10,000 or a 12,500 watt
Onan.
> >>>>Will it fit in the tray and can it be wired into the coach as it is?
> >>>>Looking for comments & suggestions by those who have made this move.
> >>>>
> >>>>Jeff & Michelle August
> >>>>1980 FC35RB
> >>>>Plymouth, WI
> >>>>
> >>>>
> >>>>
> >>>>
>
>>>>------------------------------------------------------------------------
-
> >>>
> >>>-------
> >>>
> >>>>Yahoo! Groups Links
> >>>>
> >>>> a.. To visit your group on the web, go to:
> >>>>
>
>>>><<<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yaho
> o.com/group/WanderlodgeForum/>http://groups.yahoo.
> >>
>
>>com/group/WanderlodgeForum/><http://groups.yahoo.com>http://groups.yahoo
> .com
> >>
>
>>/group/WanderlodgeForum/><<http://groups.yahoo.com/group/WanderlodgeForu
>
m/>http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/g
roup/WanderlodgeForum/
> >>
> >>>> b.. To unsubscribe from this group, send an email to:
> >>>> WanderlodgeForum-unsubscribe@yahoogroups.com
> >>>>
> >>>> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> >>
> >>Service.
> >>
> >>>>
> >>>>
> >>>>[Non-text portions of this message have been removed]
> >>>>
> >>>>
> >>>>
> >>>>----------
> >>>>Yahoo! Groups Links
> >>>> * To visit your group on the web, go to:
> >>>> *
> >>>>
> >>>
>
>><<<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.
>
com/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>
http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/grou
p/WanderlodgeForum/
>
> >>
> >>
> >>>> *
> >>>> * To unsubscribe from this group, send an email to:
> >>>> *
> >>>>
> >>>
>
>> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >>
> >>>> *
> >>>> * Your use of Yahoo! Groups is subject to the
> >>>>
> >>>
>
>><<<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>
>
http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Yahoo!
> >>
> >>
> >>>Terms of Service.
> >>>
> >>>
> >>>[Non-text portions of this message have been removed]
> >>>
> >>>
> >>>
> >>>----------
> >>>Yahoo! Groups Links
> >>> * To visit your group on the web, go to:
> >>> *
> >>>
> >>
>
>><<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.c
>
om/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>h
ttp://groups.yahoo.com/group/WanderlodgeForum/
>
> >>
> >>
> >>> *
> >>> * To unsubscribe from this group, send an email to:
> >>> *
> >>>
> >>
>
>> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >>
> >>> *
> >>> * Your use of Yahoo! Groups is subject to the
> >>>
> >>
>
>><<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>h
> ttp://docs.yahoo.com/info/terms/>Yahoo!
> >>Terms of Service.
> >>
> >>
> >>
> >>
> >>----------
> >>Yahoo! Groups Links
> >> * To visit your group on the web, go to:
> >> *
>
>><<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.co
>
m/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/
> >>
> >> *
> >> * To unsubscribe from this group, send an email to:
> >> *
>
>> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >> *
> >> * Your use of Yahoo! Groups is subject to the
>
>><<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Ya
> hoo! Terms of Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>----------
>Yahoo! Groups Links
> * To visit your group on the web, go to:
> *
>
<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/gro
up/WanderlodgeForum/
>
> *
> * To unsubscribe from this group, send an email to:
> *
>
Wan
derlodgeForum-unsubscribe@yahoogroups.com
>
> *
> * Your use of Yahoo! Groups is subject to the
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.


[Non-text portions of this message have been removed]



----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/WanderlodgeForum/

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
Quote this message in a reply
05-15-2005, 03:26
Post: #28
Replacement Generator
I would guess that my small tractor with a German twin cylinder air cooled
diesel is in the same class as the Perkins. I have had the tractor since
1981 and except for changing the oil, filters etc it has operated
flawlessly and started even in the coldest weather. I doubt if it is even
broken in yet. The japanese diesels are fine engines but they are not by
any stretch of my imagination in the same class as the Perkins. There would
have to be a real catastrophic failure in the Perkins for me to even
consider getting rid of it.

Tom
1982 FC35
Vernon Center,NY


At 07:20 AM 5/15/2005 -0700, you wrote:
>Got to agree that Yanmar puts out a heck of an engine. I have one of
>their tractors (which is a red John Deere). Yep, Yanmar makes tractors
>for Deere. It is powerful for a small tractor, runs all day of very
>little fuel and once I got rid of that puny Japanese battery and put
>in a group 24, starts every time even after sitting for months.
>
>If I was buying new and had a choice, I would but the Yanmar, but my
>experience with the Perkins has also been good.
>
>George Lowry
>'95 WBDA 4203 & GM 4106 (for sale)
>Spearfish, SD
>
>Blair wrote:
>
> > You're lucky.... For every Yanmar engine that I've see with problems,
> you
> > see a
> > hundred Perkins....
> >
> > Blair in Oregon
> >
> >
> >
> > At 07:23 PM 5/14/2005, you wrote:
> >
> >>Different strokes for different folks. The perkins is a far more expensive
> >>unit then anything you could replace it with and it is more ruggedly built
> >>for severe service. I cant for the life of me understand why people think
> >>newer is better. Exactly what dont you like about the Perkins that you
> >>found in what ever you got that replaced it? Mine has 2400 hours on it and
> >>is just broken in.
> >>
> >>tom
> >>1982 FC35
> >>Vernon Center,NY
> >>
> >>
> >>dAt 07:15 PM 5/14/2005 -0700, you wrote:
> >>
> >>
> >>>Perkins are boat anchors. I refuse to own one.
> >>>
> >>>Blair in Oregon
> >>>
> >>>
> >>>
> >>>At 06:58 PM 5/14/2005, you wrote:
> >>>
> >>>
> >>>
> >>>>Sent: Saturday, May 14, 2005 7:41 PM
> >>>>Subject: [WanderlodgeForum] Replacement Generator
> >>>>
> >>>>Jeff I had the same problem with my old perkins with the oil seal it turn
> >>>>out that the crank shaft was going to have to be replaced or built
> >>
> >>back up.
> >>
> >>>>I decided to replace the hole generator with a new 12 KW power teck.I
> >>>>personly preferd the power teck with a Kubota engin over the old worn out
> >>>>perkins engin.The power teck has no slip rings or brushes.
> >>>> Bob Loomas 1985 PT 36
> >>>>
> >>>>
> >>>>
> >>>>Today while removing the Perkins motor to replace the seals on it we
> >>>>got to thinking, does it pay to even do the job on a generator with
> >>>>more than 5500 hours on it? We wonder if all we will be doing is fixing
> >>>>this thing, and would the money be better spent in the purchase of a
> >>>>new Onan 8000 quiet deisel? Is this a good route to go and is a 8000
> >>>>big enough, its 240 pounds lighter than a 10,000 or a 12,500 watt Onan.
> >>>>Will it fit in the tray and can it be wired into the coach as it is?
> >>>>Looking for comments & suggestions by those who have made this move.
> >>>>
> >>>>Jeff & Michelle August
> >>>>1980 FC35RB
> >>>>Plymouth, WI
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>-------------------------------------------------------------------------
> >>>
> >>>-------
> >>>
> >>>>Yahoo! Groups Links
> >>>>
> >>>> a.. To visit your group on the web, go to:
> >>>>
> >>>><<<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yaho
> o.com/group/WanderlodgeForum/>http://groups.yahoo.
> >>
> >>com/group/WanderlodgeForum/><http://groups.yahoo.com>http://groups.yahoo
> .com
> >>
> >>/group/WanderlodgeForum/><<http://groups.yahoo.com/group/WanderlodgeForu
>
m/>http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group\
/WanderlodgeForum/
> >>
> >>>> b.. To unsubscribe from this group, send an email to:
> >>>> WanderlodgeForum-unsubscribe@yahoogroups.com
> >>>>
> >>>> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> >>
> >>Service.
> >>
> >>>>
> >>>>
> >>>>[Non-text portions of this message have been removed]
> >>>>
> >>>>
> >>>>
> >>>>----------
> >>>>Yahoo! Groups Links
> >>>> * To visit your group on the web, go to:
> >>>> *
> >>>>
> >>>
> >><<<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.
>
com/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>http\
://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group/Wander\
lodgeForum/
>
> >>
> >>
> >>>> *
> >>>> * To unsubscribe from this group, send an email to:
> >>>> *
> >>>>
> >>>
> >> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >>
> >>>> *
> >>>> * Your use of Yahoo! Groups is subject to the
> >>>>
> >>>
> >><<<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>
> http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Yahoo!
> >>
> >>
> >>>Terms of Service.
> >>>
> >>>
> >>>[Non-text portions of this message have been removed]
> >>>
> >>>
> >>>
> >>>----------
> >>>Yahoo! Groups Links
> >>> * To visit your group on the web, go to:
> >>> *
> >>>
> >>
> >><<<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.c
>
om/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/>http:\
//groups.yahoo.com/group/WanderlodgeForum/
>
> >>
> >>
> >>> *
> >>> * To unsubscribe from this group, send an email to:
> >>> *
> >>>
> >>
> >> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >>
> >>> *
> >>> * Your use of Yahoo! Groups is subject to the
> >>>
> >>
> >><<<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>h
> ttp://docs.yahoo.com/info/terms/>Yahoo!
> >>Terms of Service.
> >>
> >>
> >>
> >>
> >>----------
> >>Yahoo! Groups Links
> >> * To visit your group on the web, go to:
> >> *
> >><<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.co
> m/group/WanderlodgeForum/>http://groups.yahoo.com/group/WanderlodgeForum/
> >>
> >> *
> >> * To unsubscribe from this group, send an email to:
> >> *
> >> > >WanderlodgeForum-unsubscribe@yahoogroups.com
> >>
> >> *
> >> * Your use of Yahoo! Groups is subject to the
> >><<http://docs.yahoo.com/info/terms/>http://docs.yahoo.com/info/terms/>Ya
> hoo! Terms of Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>----------
>Yahoo! Groups Links
> * To visit your group on the web, go to:
> *
>
<http://groups.yahoo.com/group/WanderlodgeForum/>http://groups.yahoo.com/group/W\
anderlodgeForum/
>
> *
> * To unsubscribe from this group, send an email to:
> *
>
Wanderl\
odgeForum-unsubscribe@yahoogroups.com
>
> *
> * Your use of Yahoo! Groups is subject to the
> <http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
Quote this message in a reply
05-15-2005, 03:39
Post: #29
Replacement Generator
Just want to point out that the seal Jeff refers to is not a mechanical type of
seal but a packing type of seal.Sometimes the reason they leak is the shaft is
grooved out so it not just a matter of replacing the seal it also a little shaft
work.Unless you can do all the work yourself the question become how much money
do you want to spend on a 25 year old generator engine.
Bob Loomas 1985 PT


[Non-text portions of this message have been removed]
Quote this message in a reply
05-15-2005, 03:53
Post: #30
Replacement Generator
Subject: Re: Fw: [WanderlodgeForum] Replacement Generator

A $6000. repair bill cause me to get rid of the old outdated perkins.
If the Perkins is so great why is it not still being use in new generators?
Bob Loomas 1985 PT


> >>>>
> >>>>
> >>>>
>
> >>> *
> >>>
> >>> >
> >
> >
> >
> >
> >


[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)