Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
oil pressure guage not working.
07-15-2006, 02:44
Post: #1
oil pressure guage not working.
Don't even know where to start. I have a 1994 40' with an 8v92 coach.
Any help would be appreciated.
Thanks in advance.

Nelson Westminster, Md
Quote this message in a reply
07-15-2006, 05:20
Post: #2
oil pressure guage not working.
Nelson: I would start at the sender. The sender on my 8v92 is located under
the right-hand rear of the engine. It is silver or gold about 2" high and 1" in
diameter. Check to see if the wire us attached to the sender first. It takes
about 5 minutes to change/less than $20.00. My gauge quit on the road, put a
new sender in, it quit also, put another new sender in and has been fine
since.

Leroy Eckert
1990WB-40
Niceville,FL





----- Original Message -----
From: nslinkman
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, July 15, 2006 9:44 AM
Subject: [WanderlodgeForum] oil pressure guage not working.


Don't even know where to start. I have a 1994 40' with an 8v92 coach.
Any help would be appreciated.
Thanks in advance.

Nelson Westminster, Md





[Non-text portions of this message have been removed]
Quote this message in a reply
07-15-2006, 06:48
Post: #3
oil pressure guage not working.
Tough part is finding a parts house that stocks the sender. It has to match
the gauge, of the same ohmage (sp?). I found my replacement sender at a
shop that builds new dashboards for busses...if you have difficulty finding a
new sender, let me know, and I'll try to find the name and number of the shop
where I got mine (somewhere in Gardena, CA). Do you have Teleflex gauges?

Cost about $40 I think...

Kevin McKeown
Yorba Linda, CA
1986 38' PT
8V92


[Non-text portions of this message have been removed]
Quote this message in a reply
07-15-2006, 11:48
Post: #4
oil pressure guage not working.
I purchased the part from Coachworks by MacDonald in Columbus, GA. They are a
BB warranty and mod house.

Leroy Eckert
1990 WB-40
Niceville, FL




----- Original Message -----
From: krminyl@...
To: WanderlodgeForum@yahoogroups.com
Sent: Saturday, July 15, 2006 5:48 PM
Subject: Re: [WanderlodgeForum] oil pressure guage not working.


Tough part is finding a parts house that stocks the sender. It has to match
the gauge, of the same ohmage (sp?). I found my replacement sender at a
shop that builds new dashboards for busses...if you have difficulty finding a
new sender, let me know, and I'll try to find the name and number of the shop
where I got mine (somewhere in Gardena, CA). Do you have Teleflex gauges?

Cost about $40 I think...

Kevin McKeown
Yorba Linda, CA
1986 38' PT
8V92

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Quote this message in a reply
07-15-2006, 17:46
Post: #5
oil pressure guage not working.
--- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert"
wrote:
>
Leroy thanks alot for the info. I will check it tomorrow.

> Nelson: I would start at the sender. The sender on my 8v92 is
located under the right-hand rear of the engine. It is silver or
gold about 2" high and 1" in diameter. Check to see if the wire us
attached to the sender first. It takes about 5 minutes to
change/less than $20.00. My gauge quit on the road, put a new
sender in, it quit also, put another new sender in and has been
fine since.
>
> Leroy Eckert
> 1990WB-40
> Niceville,FL
>
>
>
>
>
> ----- Original Message -----
> From: nslinkman
> To: WanderlodgeForum@yahoogroups.com
> Sent: Saturday, July 15, 2006 9:44 AM
> Subject: [WanderlodgeForum] oil pressure guage not working.
>
>
> Don't even know where to start. I have a 1994 40' with an 8v92
coach.
> Any help would be appreciated.
> Thanks in advance.
>
> Nelson Westminster, Md
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
07-15-2006, 17:49
Post: #6
oil pressure guage not working.
I will take the dash out tomorrow. I will let you know the brand.

Thanks Alot

--- In WanderlodgeForum@yahoogroups.com, krminyl@... wrote:
>
> Tough part is finding a parts house that stocks the sender. It
has to match
> the gauge, of the same ohmage (sp?). I found my replacement
sender at a
> shop that builds new dashboards for busses...if you have
difficulty finding a
> new sender, let me know, and I'll try to find the name and number
of the shop
> where I got mine (somewhere in Gardena, CA). Do you have
Teleflex gauges?
>
> Cost about $40 I think...
>
> Kevin McKeown
> Yorba Linda, CA
> 1986 38' PT
> 8V92
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)