Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Transmission Red Light
10-09-2008, 07:16
Post: #1
Transmission Red Light
Does anybody know if there is a way to overide the transmission do not
shift light. The transmission will not shift. I am sure the problem is
electrical. I am parked in a place that a tow truck can't get to. I
just need to be able to back up about 100'.
Thanks for any help.

Joe Blankenship
1990 WB40
La Conner, Wa
Quote this message in a reply
10-09-2008, 07:33
Post: #2
Transmission Red Light
Joe,

As you have now discovered, the "do not shift" is really a "you can
not shift" light! First thing to check is to make sure the coach has
good 12v power. Check the dash gauges. If your batteries are run
down below 12v, that may be the problem. When I lost the alternators,
the batteries ran down and the do not shift light came on. Jumped it
to start the gen set and made it home on gen set/battery chargers.

Mike Bulriss
1991 WB40 "Texas Minivan"
San Antonio, TX




--- In WanderlodgeForum@yahoogroups.com, "joedana0502"
wrote:
>
> Does anybody know if there is a way to overide the transmission do not
> shift light. The transmission will not shift. I am sure the problem is
> electrical. I am parked in a place that a tow truck can't get to. I
> just need to be able to back up about 100'.
> Thanks for any help.
>
> Joe Blankenship
> 1990 WB40
> La Conner, Wa
>
Quote this message in a reply
10-09-2008, 07:34
Post: #3
Transmission Red Light
Cycle the rear start switch and place in the front start position. If my front rear start selector is not just right it will give me a do not shift light. I do not have a drawing for the tranny but if it's not the rear start selector it's probably a ground related to a the speed sensor. Seems like I remember a post a long while back with the same symptom. Maybe the one who had the problem will talk.
Leroy Eckert
1990 WB-40 Smoke N Mirrors
Dahlonega, GA
Royale Conversion

--- On Thu, 10/9/08, joedana0502 wrote:
From: joedana0502
Subject: [WanderlodgeForum] Transmission Red Light
To: WanderlodgeForum@yahoogroups.com
Date: Thursday, October 9, 2008, 3:16
PM



Does anybody know if there is a way to overide the transmission do not

shift light. The transmission will not shift. I am sure the problem is

electrical. I am parked in a place that a tow truck can't get to. I

just need to be able to back up about 100'.

Thanks for any help.



Joe Blankenship

1990 WB40

La Conner, Wa



Quote this message in a reply
10-09-2008, 08:26
Post: #4
Transmission Red Light
I would try some of the test like Leroy said with someone in the
drivers seat looking at the light. when it goes off you will have a
clue to the connection that has issue. That way it wont end up a now
and again problem. A shop may just check and poke at everything
untill bychance it works. always good to learn the real cause. I
would think it easier and less bucks to find a mobile tec to look it
over than have it towed.

the allison computer is in the bay under the driver ( in the 94)
there are plugs and test ports under the shift console in the
cockpit and there is a converter modual between the atec and ddec
some place that could have issue with voltage + or ground.

grounds are my first review. I often run a cable from the battery -
to various locations to add a ground and bypass a weak one.

I always wondered if the retarder making the brake light glow could
cause an issue with the Allison computer?

Good luck, I am sure you will find it without a tow and be better
learned on the systems while you search
Greg94ptCa




--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> Cycle the rear start switch and place in the front start position.
If my front rear start selector is not just right it will give me a
do not shift light. I do not have a drawing for the tranny but if
it's not the rear start selector it's probably a ground related to a
the speed sensor. Seems like I remember a post a long while back
with the same symptom. Maybe the one who had the problem will talk.
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>
> --- On Thu, 10/9/08, joedana0502 wrote:
> From: joedana0502
> Subject: [WanderlodgeForum] Transmission Red Light
> To: WanderlodgeForum@yahoogroups.com
> Date: Thursday, October 9, 2008, 3:16 PM
>
>
>
>
>
>
>
>
>
>
>
> Does anybody know if there is a way to overide the
transmission do not
>
> shift light. The transmission will not shift. I am sure the
problem is
>
> electrical. I am parked in a place that a tow truck can't get to. I
>
> just need to be able to back up about 100'.
>
> Thanks for any help.
>
>
>
> Joe Blankenship
>
> 1990 WB40
>
> La Conner, Wa
>
Quote this message in a reply
10-09-2008, 08:53
Post: #5
Transmission Red Light
There should be a by pass code for that problem in the files section. It
included the "how to."

Safe travels,

Ralph and Charolette Fullenwider
84FC35 "Ruff Diamond"
Duncan, Oklahoma

At 08:26 PM 10/9/2008 +0000, you wrote:
>I would try some of the test like Leroy said with someone in the
>drivers seat looking at the light. when it goes off you will have a
>clue to the connection that has issue. That way it wont end up a now
>and again problem. A shop may just check and poke at everything
>untill bychance it works. always good to learn the real cause. I
>would think it easier and less bucks to find a mobile tec to look it
>over than have it towed.
>
>the allison computer is in the bay under the driver ( in the 94)
>there are plugs and test ports under the shift console in the
>cockpit and there is a converter modual between the atec and ddec
>some place that could have issue with voltage + or ground.
>
> grounds are my first review. I often run a cable from the battery -
>to various locations to add a ground and bypass a weak one.
>
>I always wondered if the retarder making the brake light glow could
>cause an issue with the Allison computer?
>
>Good luck, I am sure you will find it without a tow and be better
>learned on the systems while you search
>Greg94ptCa
>
>
>
>
>--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
> wrote:
> >
> > Cycle the rear start switch and place in the front start position.
>If my front rear start selector is not just right it will give me a
>do not shift light. I do not have a drawing for the tranny but if
>it's not the rear start selector it's probably a ground related to a
>the speed sensor. Seems like I remember a post a long while back
>with the same symptom. Maybe the one who had the problem will talk.
> > Leroy Eckert
> > 1990 WB-40 Smoke N Mirrors
> > Dahlonega, GA
> > Royale Conversion
> >
> > --- On Thu, 10/9/08, joedana0502 wrote:
> > From: joedana0502
> > Subject: [WanderlodgeForum] Transmission Red Light
> > To: WanderlodgeForum@yahoogroups.com
> > Date: Thursday, October 9, 2008, 3:16 PM
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Does anybody know if there is a way to overide the
>transmission do not
> >
> > shift light. The transmission will not shift. I am sure the
>problem is
> >
> > electrical. I am parked in a place that a tow truck can't get to. I
> >
> > just need to be able to back up about 100'.
> >
> > Thanks for any help.
> >
> >
> >
> > Joe Blankenship
> >
> > 1990 WB40
> >
> > La Conner, Wa
> >
>
>
Quote this message in a reply
10-09-2008, 12:57
Post: #6
Transmission Red Light
--- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
wrote:
>
> Cycle the rear start switch and place in the front start position.
If my front rear start selector is not just right it will give me a do
not shift light. I do not have a drawing for the tranny but if it's
not the rear start selector it's probably a ground related to a the
speed sensor. Seems like I remember a post a long while back with the
same symptom. Maybe the one who had the problem will talk.
> Leroy Eckert
> 1990 WB-40 Smoke N Mirrors
> Dahlonega, GA
> Royale Conversion
>
> --- On Thu, 10/9/08, joedana0502 wrote:
> From: joedana0502
> Subject: [WanderlodgeForum] Transmission Red Light
> To: WanderlodgeForum@yahoogroups.com
> Date: Thursday, October 9, 2008, 3:16 PM



Thanks for all to good ideas. I did find out that something is wrong
with the rear starter switch. It will not start at all from the rear.
I will tear into that switch and see what I can find wrong.
Again thank for all the help.

Joe Blankenship
1990 WB40
La Conner, Wa
Royal Conversion
>
>
>
>
>
>
>
>
>
>
>
> Does anybody know if there is a way to overide the
transmission do not
>
> shift light. The transmission will not shift. I am sure the problem is
>
> electrical. I am parked in a place that a tow truck can't get to. I
>
> just need to be able to back up about 100'.
>
> Thanks for any help.
>
>
>
> Joe Blankenship
>
> 1990 WB40
>
> La Conner, Wa
>
Quote this message in a reply
10-09-2008, 17:44
Post: #7
Transmission Red Light
Maybe it is something to do with Neutral safety switch? the start
terminal runs from the key to that NSS then to the starter relay
then to the starter solenoid. the Neutral safety switch proves issue
with other things like high idle and retarder functions. the rear
switch orange=power pink=ign purple=start.

I guess the switch that Leroy spoke of has a function to not allow
the Allison to be shifted when the bus is started from the rear. Do
you see the switch Leroy spoke of that makes the choice front or
rear? even the front ign runs back to that switch. I found the 20
amp fuse/brakers for the ig behind the bumper.

Greg94ptCa

--- In WanderlodgeForum@yahoogroups.com, "joedana0502"
wrote:
>
> --- In WanderlodgeForum@yahoogroups.com, Leroy Eckert
> wrote:
> >
> > Cycle the rear start switch and place in the front start
position.
> If my front rear start selector is not just right it will give me
a do
> not shift light. I do not have a drawing for the tranny but if it's
> not the rear start selector it's probably a ground related to a the
> speed sensor. Seems like I remember a post a long while back with
the
> same symptom. Maybe the one who had the problem will talk.
> > Leroy Eckert
> > 1990 WB-40 Smoke N Mirrors
> > Dahlonega, GA
> > Royale Conversion
> >
> > --- On Thu, 10/9/08, joedana0502 wrote:
> > From: joedana0502
> > Subject: [WanderlodgeForum] Transmission Red Light
> > To: WanderlodgeForum@yahoogroups.com
> > Date: Thursday, October 9, 2008, 3:16 PM
>
>
>
> Thanks for all to good ideas. I did find out that something is
wrong
> with the rear starter switch. It will not start at all from the
rear.
> I will tear into that switch and see what I can find wrong.
> Again thank for all the help.
>
> Joe Blankenship
> 1990 WB40
> La Conner, Wa
> Royal Conversion
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Does anybody know if there is a way to overide the
> transmission do not
> >
> > shift light. The transmission will not shift. I am sure the
problem is
> >
> > electrical. I am parked in a place that a tow truck can't get
to. I
> >
> > just need to be able to back up about 100'.
> >
> > Thanks for any help.
> >
> >
> >
> > Joe Blankenship
> >
> > 1990 WB40
> >
> > La Conner, Wa
> >
>
Quote this message in a reply
10-12-2008, 16:40
Post: #8
Transmission Red Light
I had that happen to me earlier this year. Havent
been to a dealer to get it checked, but thats on
the list of things I need to get looked at before
my next trip.

You should have some flashing lights by the check
trans sw if its like my '87 PT40. If you turn on
the ignition and you _dont_ get the 'do not shift
light' AND the trans error light for a few seconds
then you have a burnt out bulb. You'll need to
find the code and go from there. I replaced mine
with a LED from ratshack...

The plug for the trans is on the passenger side of
the trans on mine, just about even with the
charger compartment. YMMV.
You can try 'exercising' the plug and see if that
work, or check voltages there.

I attached a copy of the code chart, hope it helps...

/Joe


joedana0502 wrote:
>
>
> Does anybody know if there is a way to overide the transmission do not
> shift light. The transmission will not shift. I am sure the problem is
> electrical. I am parked in a place that a tow truck can't get to. I
> just need to be able to back up about 100'.
> Thanks for any help.
>
> Joe Blankenship
> 1990 WB40
> La Conner, Wa
>

Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)