Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Zip Dee Window Awnings
02-23-2007, 03:44
Post: #11
Zip Dee Window Awnings
Hey Chuck, good conversation yesterday. I have a Zip Dee window
awning in the same condition. From what I've been told on here the
spring is probably broken. It's $50 from Zip Dee. I'm gonna drill
out some rivets this weekend and find out for sure. I'll let you
know. If you have time, maybe I'll drive the bus to camping world on
Saturday. We can compare notes.

--- In WanderlodgeForum@yahoogroups.com, "Chuck Wheeler"
wrote:
>
> The front left awning has one of the springs either broken or
disconnected.
> Has anyone every had one of the mechanisms apart? How?
>
> - Chuck Wheeler -
> 82 FC 31 SB
> Fort Worth, TX
>
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of Ralph L.
Fullenwider
> Sent: Thursday, February 22, 2007 3:44 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] Re: Zip Dee Window Awnings
>
>
>
> Rule of thumb for Zip Dee awnings is: 1 turn per linear foot plus 5
turns
>
> Safe travels,
>
> Ralph and Charolette Fullenwider
> 84FC35
> Ralph's RV Solutions, Duncan, Oklahoma
>
> At 01:36 PM 2/22/2007 -0600, you wrote:
> >Something like 30 turns. The left arm, facing the awing is the
energized
> >component. You turn the square solid portion of the arm, might be
33
> >turns, I forget. Zipdee has good customer service and I have been
> >satisfied with them.
> >After my sad experiencel, Zipdee sent me Ehrhardts RV,
http://www.etstrailers.com
> >they did a good job and the cost was reasonable.
> >Mike Hohnstein
> >Germantown, WI
> >83FC35
> > ----- Original Message -----
> > From: Keith Strehle
> > To: WanderlodgeForum@
> yahoogroups.com
> > Sent: Thursday, February 22, 2007 1:09 PM
> > Subject: [WanderlodgeForum] Re: Zip Dee Window Awnings
> >
> >
> > Thanks for the advice. Provided the spring is not broken, is
there a
> > process for re-winding them?
> >
> >
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)