Microwave/Convection Oven
|
11-07-2006, 09:03
Post: #11
|
|||
|
|||
Microwave/Convection Oven
Hank: I used Sharp R-1874 Carousel Stainless. Opening 30" wide.
Leroy Eckert 1990 WB-40 Niceville, FL ----- Original Message ----- From: Henry Jay Hannigan To: WanderlodgeForum@yahoogroups.com Sent: Sunday, November 05, 2006 8:35 PM Subject: [WanderlodgeForum] Re: Microwave/Convection Oven ---no rush Leroy, as I will be in Australia for a few months....but thanks for your reply. It is Monday 2pm here in Sydney...will leave for MELBOURNE on Thursday. Thanks MATE! LOL Hank Hannigan 90SP36 with a great ZF transmission! In WanderlodgeForum@yahoogroups.com, "Leroy Eckert" > > Hank: > I'll send you the model number I used and the dimensions, then you can decide. I replaced the black original with stainless. Will try to do that tomorrow. > > Leroy Eckert > 1990 WB-40 > Niceville, FL > > > > > ----- Original Message ----- > From: birdshill123 > To: WanderlodgeForum@yahoogroups.com > Sent: Sunday, November 05, 2006 5:38 PM > Subject: [WanderlodgeForum] Re: Microwave/Convection Oven > > > > Hank: If technology allows microwaves to be sent via email I want one > too!!!!! > > Bruce > 1988 FC35 > > > > > > [Non-text portions of this message have been removed] > [Non-text portions of this message have been removed] |
|||
11-07-2006, 09:13
Post: #12
|
|||
|
|||
Microwave/Convection Oven
---Leroy:
My 90SP has approx 24 and 5/8 opening..thanks anyway......I'll get something when I return from Australia in the Spring. LOL Hank Hannigan 90SP36 80FC31 for sale in the Spring..maybe.. In WanderlodgeForum@yahoogroups.com, "Leroy Eckert" > > Hank: I used Sharp R-1874 Carousel Stainless. Opening 30" wide. > > Leroy Eckert > 1990 WB-40 > Niceville, FL > > > > > > ----- Original Message ----- > From: Henry Jay Hannigan > To: WanderlodgeForum@yahoogroups.com > Sent: Sunday, November 05, 2006 8:35 PM > Subject: [WanderlodgeForum] Re: Microwave/Convection Oven > > > ---no rush Leroy, as I will be in Australia for a few months....but > thanks for your reply. It is Monday 2pm here in Sydney...will > leave for MELBOURNE on Thursday. > Thanks MATE! > LOL > Hank Hannigan > 90SP36 with a great ZF transmission! > > In WanderlodgeForum@yahoogroups.com, "Leroy Eckert" > > > > > Hank: > > I'll send you the model number I used and the dimensions, then you > can decide. I replaced the black original with stainless. Will try > to do that tomorrow. > > > > Leroy Eckert > > 1990 WB-40 > > Niceville, FL > > > > > > > > > > ----- Original Message ----- > > From: birdshill123 > > To: WanderlodgeForum@yahoogroups.com > > Sent: Sunday, November 05, 2006 5:38 PM > > Subject: [WanderlodgeForum] Re: Microwave/Convection Oven > > > > > > > > Hank: If technology allows microwaves to be sent via email I > want one > > too!!!!! > > > > Bruce > > 1988 FC35 > > > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > [Non-text portions of this message have been removed] > |
|||
11-07-2006, 12:14
Post: #13
|
|||
|
|||
Microwave/Convection Oven
Speaking of micros, last night mine died while wife was cooking my
turkey legs...we have an 84 PT36...the Sharp is mounted in its own cabinet...what's holding it in? Can I just pull it out without damage to cabinet? Anybody done this to an 84? Bob Lawrence 84 PT36 Tacoma, Wa. > > Leroy, The dimensions of the Sharp I removed are 24 5/8(w) x 15 3/4 > (h) x 18 3/4 (d). I believe the model number was R8580A. Thanks > for your help. Mike McMahan > > > ----- Original Message ----- > > From: Mike McMahan > > To: WanderlodgeForum@yahoogroups.com > > Sent: Wednesday, November 01, 2006 5:51 PM > > Subject: [WanderlodgeForum] Microwave/Convection Oven > > > > > > Well the original Sharp Microwave/Convection Oven in my 1989 > PT40 > > finally died. It is a Model R8580A. I remember several of you > have > > replaced yours and I was checking to see if any of you could > tell me > > what later model units would fit well in the built in space in > the > > bird. I was told that a Sharp R930 was close but I wanted to > check > > with the group. Thanks, Mike McMahan 1989 PT Counting the days > until > > leaving for South Padre Island for Christmas break > > > |
|||
11-08-2006, 01:47
Post: #14
|
|||
|
|||
Microwave/Convection Oven
Bob: My Sharp hangs above the stove in the overhead cabinet. The original had
2 mount bolts on the top near the front of the unit which required me to remove the tank monitor panel to access. These bolts were installed through a horizontal wood plate. The new installation had bolts from the lower front of the unit to the top of the wall mount plate on a 45 degree angle. In both cases the lower rear of the unit rested on a lip in the wall mount bracket which allowed the unit to be rotated up to its final position. The unit was placed on the lip at about 45 degrees and the front rotated up. Reverse the order for removal. Note: The wall mount bracket contained about 60 screws. I guess BB did not want it t move. Hope this helps. Leroy Eckert 1990 WB-40 Niceville, FL ----- Original Message ----- From: Bob Lawrence To: WanderlodgeForum@yahoogroups.com Sent: Tuesday, November 07, 2006 6:14 PM Subject: [WanderlodgeForum] Re: Microwave/Convection Oven Speaking of micros, last night mine died while wife was cooking my turkey legs...we have an 84 PT36...the Sharp is mounted in its own cabinet...what's holding it in? Can I just pull it out without damage to cabinet? Anybody done this to an 84? Bob Lawrence 84 PT36 Tacoma, Wa. > > Leroy, The dimensions of the Sharp I removed are 24 5/8(w) x 15 3/4 > (h) x 18 3/4 (d). I believe the model number was R8580A. Thanks > for your help. Mike McMahan > > > ----- Original Message ----- > > From: Mike McMahan > > To: WanderlodgeForum@yahoogroups.com > > Sent: Wednesday, November 01, 2006 5:51 PM > > Subject: [WanderlodgeForum] Microwave/Convection Oven > > > > > > Well the original Sharp Microwave/Convection Oven in my 1989 > PT40 > > finally died. It is a Model R8580A. I remember several of you > have > > replaced yours and I was checking to see if any of you could > tell me > > what later model units would fit well in the built in space in > the > > bird. I was told that a Sharp R930 was close but I wanted to > check > > with the group. Thanks, Mike McMahan 1989 PT Counting the days > until > > leaving for South Padre Island for Christmas break > > > [Non-text portions of this message have been removed] |
|||
11-08-2006, 16:14
Post: #15
|
|||
|
|||
Microwave/Convection Oven
Hi Leroy,
Thanks for the reply...but..mine doesn't have any of that..I can see 4 feet but don't see any bolts thru the bottom of the stainless. Looks like yours is a lot different than mine. Bob --- In WanderlodgeForum@yahoogroups.com, "Leroy Eckert" > > Bob: My Sharp hangs above the stove in the overhead cabinet. The original had 2 mount bolts on the top near the front of the unit which required me to remove the tank monitor panel to access. These bolts were installed through a horizontal wood plate. The new installation had bolts from the lower front of the unit to the top of the wall mount plate on a 45 degree angle. In both cases the lower rear of the unit rested on a lip in the wall mount bracket which allowed the unit to be rotated up to its final position. The unit was placed on the lip at about 45 degrees and the front rotated up. Reverse the order for removal. Note: The wall mount bracket contained about 60 screws. I guess BB did not want it t move. > Hope this helps. > > Leroy Eckert > 1990 WB-40 > Niceville, FL > > > > > > ----- Original Message ----- > From: Bob Lawrence > To: WanderlodgeForum@yahoogroups.com > Sent: Tuesday, November 07, 2006 6:14 PM > Subject: [WanderlodgeForum] Re: Microwave/Convection Oven > > > Speaking of micros, last night mine died while wife was cooking my > turkey legs...we have an 84 PT36...the Sharp is mounted in its own > cabinet...what's holding it in? Can I just pull it out without > damage to cabinet? Anybody done this to an 84? > Bob Lawrence > 84 PT36 > Tacoma, Wa. > > > > Leroy, The dimensions of the Sharp I removed are 24 5/8(w) x 15 > 3/4 > > (h) x 18 3/4 (d). I believe the model number was R8580A. Thanks > > for your help. Mike McMahan > > > > > > > ----- Original Message ----- > > > From: Mike McMahan > > > To: WanderlodgeForum@yahoogroups.com > > > Sent: Wednesday, November 01, 2006 5:51 PM > > > Subject: [WanderlodgeForum] Microwave/Convection Oven > > > > > > > > > Well the original Sharp Microwave/Convection Oven in my 1989 > > PT40 > > > finally died. It is a Model R8580A. I remember several of you > > have > > > replaced yours and I was checking to see if any of you could > > tell me > > > what later model units would fit well in the built in space in > > the > > > bird. I was told that a Sharp R930 was close but I wanted to > > check > > > with the group. Thanks, Mike McMahan 1989 PT Counting the days > > until > > > leaving for South Padre Island for Christmas break > > > > > > > > > > > [Non-text portions of this message have been removed] > |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)