Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Differential oil level SP36
04-18-2006, 01:33
Post: #1
Differential oil level SP36
Just completed a lube job on my 90 SP36 and noted only one place
on the differential having what looked like an inspection plug.
It appears to be a slotted end shaft with a locknut on it. Is this
where the oil level is checked? If so, what should the level be
and is there any guidelines for how far the slotted shaft should be
screwed back in?

Chuck Harrison
90 SP36
Akron, Ohio
Quote this message in a reply
04-18-2006, 01:43
Post: #2
Differential oil level SP36
That's the pinion gear preload. It wouldn't be good to disturb
that setting. The road side of the carrier should have a 1/2" npt plug a little
below the pinion center line, your lube should be with in 1/2 inch of that
opening, coach sitting on a level surface.
Mike Hohnstein
----- Original Message -----
From: williamcharrison
To: WanderlodgeForum@yahoogroups.com
Sent: Tuesday, April 18, 2006 8:33 AM
Subject: [WanderlodgeForum] Differential oil level SP36


Just completed a lube job on my 90 SP36 and noted only one place
on the differential having what looked like an inspection plug.
It appears to be a slotted end shaft with a locknut on it. Is this
where the oil level is checked? If so, what should the level be
and is there any guidelines for how far the slotted shaft should be
screwed back in?

Chuck Harrison
90 SP36
Akron, Ohio





SPONSORED LINKS Recreational vehicles Wanderlodge Automotive maintenance
Recreational vehicle dealer Used recreational vehicles Automotive
radiators


------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "WanderlodgeForum" on the web.

b.. To unsubscribe from this group, send an email to:
WanderlodgeForum-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------



[Non-text portions of this message have been removed]
Quote this message in a reply
04-18-2006, 02:37
Post: #3
Differential oil level SP36
Thanks Mike.

--- In WanderlodgeForum@yahoogroups.com, "Mike Hohnstein"
<MHOHNSTEIN@...> wrote:
>
> That's the pinion gear preload. It wouldn't be good to disturb
> that setting. The road side of the carrier should have a 1/2" npt
plug a little below the pinion center line, your lube should be with
in 1/2 inch of that opening, coach sitting on a level surface.
> Mike Hohnstein
> ----- Original Message -----
> From: williamcharrison
> To: WanderlodgeForum@yahoogroups.com
> Sent: Tuesday, April 18, 2006 8:33 AM
> Subject: [WanderlodgeForum] Differential oil level SP36
>
>
> Just completed a lube job on my 90 SP36 and noted only one
place
> on the differential having what looked like an inspection plug.
> It appears to be a slotted end shaft with a locknut on it. Is
this
> where the oil level is checked? If so, what should the level be
> and is there any guidelines for how far the slotted shaft should
be
> screwed back in?
>
> Chuck Harrison
> 90 SP36
> Akron, Ohio
>
>
>
>
>
> SPONSORED LINKS Recreational vehicles Wanderlodge Automotive
maintenance
> Recreational vehicle dealer Used recreational vehicles
Automotive radiators
>
>
> -------------------------------------------------------------------
-----------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "WanderlodgeForum" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service.
>
>
> -------------------------------------------------------------------
-----------
>
>
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)