Xantrex Generator Auto Start

[chaaur2]

Wiring connections at the start switch to make it work

--- In WanderlodgeForum@yahoogroups.com, "mbulriss" <mbulriss@...> wrote:
>
> Charlie,
>
> I'm not clear if you are asking about wire runs to reach a gen start switch,
or wiring connections at the start switch to make it work?
>
> Assuming (danger, I know) that you are talking wiring runs, and that your
Xantrex is in the rear bay on the passenger side right above the battery bank,
like on my 91, wouldn't it be easier to run the wire to the gen start switch in
the bedroom rather than to the front overhead? On my 91, the rear gen start
switch is almost directly above the Inverter/Charger. That would be the
shortest wiring run.
>
> Close?
>
> Mike Bulriss
> 1991 WB40 "Texas Minivan"
> San Antonio, TX
>
> --- In WanderlodgeForum@yahoogroups.com, "chaaur2" wrote:
> >
> > I have a Xantrex Freedom SW 3012 Inverter/Charger installed in my 93 WB, I
am attempting to install the auto start for the generator using the remote start
switch that is located in the overhead. Any help with the wiring would be
appreciated.
> >
> > Thanks
> > Charlie
> > St. Albans, WV
> > 93 WB
> >
>