Heater part

[ronmarabito2002]

Chuck: What was your temp. set at? Was it automatic or manual?

R.E. (Ron) Marabito, Dallas, TX 92WB40

--- In WanderlodgeForum@yahoogroups.com, "Chuck Wheeler" wrote:
>
> Besides the current draw of the heater you need to know the cutoff
> temperature. I was lucky, the switch used in our heaters was the same one
> used to protect most electric dryers so it was available and cheap ($6.50)
> locally at Appliance parts.
>
>
>
> - Chuck Wheeler-
>
> 1982 FC 31SB Fort Worth TX
>
> _____
>
> From: WanderlodgeForum@yahoogroups.com
> [mailto:WanderlodgeForum@yahoogroups.com] On Behalf Of David Ward
> Sent: Wednesday, December 09, 2009 8:33 PM
> To: WanderlodgeForum@yahoogroups.com
> Subject: Re: [WanderlodgeForum] Re: Heater part
>
>
>
>
>
>
> Ron,
> I would think that given the wattage of the heater somebody like Grainger or
> Johnstone Supply should be able to come up with a high limit switch for it.
> Dave Ward
> 80FC31SB
> Mesa, AZ
>
> --- On Thu, 12/10/09, ronmarabito2002 wrote:
>
>
> From: ronmarabito2002
> Subject: [WanderlodgeForum] Re: Heater part
> To: WanderlodgeForum@yahoogroups.com
> Date: Thursday, December 10, 2009, 2:26 AM
>
>
>
> They are not interested in selling anything for the old models. They only
> want to sell you a new heater unit complete. All I need is a less than $10
> part and I intend to find it somewhere.
>
> Thanks for your response.
>
> R.E. (Ron) Marabito, Dallas, TX 92WB40
>
> --- In WanderlodgeForum@ yahoogroups. com, "marvjeanm380"
> wrote:
> >
> > Ron:
> >
> > Cadet is located in Vancouver, WA. Their main part supplier is Reliable
> Parts. They have a location in the Portland, OR area that I have bought
> from. Their number is Sales: (503) 239-6050. Give them a call and they will
> either sell you a part or can provide you with a current model electric
> heater. I bought one for a project and it was suprisingly cheap.
> >
> > Marv
> > 2004 M380
> > Ocean Shores, WA
> >
> >
> > --- In WanderlodgeForum@ yahoogroups. com, "ronmarabito2002" > > wrote:
> > >
> > > No temperature stamped on this one. Only markings are TOD-1-B1-B
> > >
> > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > >
> > > --- In WanderlodgeForum@ yahoogroups.. com, "Chuck Wheeler"
> wrote:
> > > >
> > > > Ron, if you look closely you should see a temperature stamped in it.
> This
> > > > is the cutoff temperature that protects from overheating. They are
> > > > available locally here from Granger, although I get most of my parts
> from
> > > > Appliance parts Co in Richland hills.
> > > >
> > > >
> > > >
> > > > - Chuck Wheeler-
> > > >
> > > > 1982 FC 31SB Fort Worth TX
> > > >
> > > > _____
> > > >
> > > > From: WanderlodgeForum@ yahoogroups. com
> > > > [mailto:WanderlodgeForum@ yahoogroups. com] On Behalf Of
> ronmarabito2002
> > > > Sent: Wednesday, December 09, 2009 11:21 AM
> > > > To: WanderlodgeForum@ yahoogroups. com
> > > > Subject: [WanderlodgeForum] Re: Heater part
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yes Curt. How do we determine the correct size?
> > > >
> > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > >
> > > > --- In WanderlodgeForum@
> > > > yahoogroups. com, Curt Sprenger wrote:
> > > > >
> > > > > Ron,
> > > > >
> > > > > Look like this?
> > > > >
> > > > > http://www.thermodi
> > > > <http://www.thermodi
> <http://www.thermodisc.com/productdetail.asp?ProductID=1> sc.com/productde
> tail.asp? ProductID= 1>
> > > > sc.com/productdetai l.asp?ProductID= 1
> > > > >
> > > > > the site has lots of them.
> > > > >
> > > > >
> > > > > Curt Sprenger
> > > > > 1987 PT38 8V92 "MacAttack Racing"
> > > > > Anaheim Hills, CA
> > > > >
> > > > >
> > > > >
> > > > > On Wed, Dec 9, 2009 at 9:07 AM, ronmarabito2002
> wrote:
> > > > >
> > > > > >
> > > > > >
> > > > > > Studying this closer, it is probably a heat sensor or
> thermocouple.
> > > > > >
> > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > > >
> > > > > > --- In WanderlodgeForum@ > ups.com>
> > > > yahoogroups. com,
> > > > > > "ronmarabito2002" wrote:
> > > > > > >
> > > > > > > Hi all: Does anyone have a source for the round disc resistor or
> > > > > > capacitor that mounts in the top of the Bathroom Electric Heater
> for a
> > > > > > 92WB40. Mine has disintegrated and can't get heat.
> > > > > > >
> > > > > > > It has TOD 1-B1-B stamped on it.
> > > > > > >
> > > > > > > R.E. (Ron) Marabito, Dallas, TX 92WB40
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>