Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Altimeter repair
06-06-2008, 16:11
Post: #35
Altimeter repair
C-152 has a maximum altitude of 14,000 ft. more or less, but the
climb rate drops down to something like 200-250 feet per minute once
you get above 10K feet. (pretty slow.)

However, on the occasion that I went to 12,000, there was a very
strong southerly wind that interacted with the Tehachapi mountains,
forming a 'standing wave' effect. At one point, I was in a full climb
to maintain 6500 ft or so (VFR) but then I was later in a humongus
updraft that gave me a climb of 500-600 ft per minute. As soon as I
realized what was going on, I decided to take advantage of the ride
so I could gain speed in a controlled decent north of the mountains.

It was actually a nasty day for flying such a small plane. Heavy head
wind -- fly high, clear of the valley fog and ground speed was
practically zip. Fly low, where the wind wasn't so bad, and the
visibility was not-so-great (but still legal). In the end, I opted
for low and mostly followed I-5 home to Sacramento -- checking my
progress against the highway signs...

The flight was taking so long, I had to stop for fuel in Fresno
(FAT)... As I made my approach, the tower said "keep your speed up,
there's a commuter turbo prop behind you..." so I flew the approach
at near-cruising speed, killing the power and shortly after dropping
flaps over the end of the runway. I even made the first turn off.
(Thanks to that headwind...)

Eventually, we got home to Rio Linda (near Sacramento) where I was
based. By then, the winds dropped, the fog lifted and we landed in
near-cloudless night after a long day of flying. (This was the Sunday
after Thanksgiving...)

It was an interesting flight for a relatively low-time pilot.

Pete Masterson
'95 Blue Bird Wanderlodge WBDA 42
aeonix1@...
On the road near Buttonwillow, CA (going home at last!)



On Jun 6, 2008, at 3:11 PM, dwalks@... wrote:

> Pete how did you get a C-152 to 12000.? It must have taken a long
> time.
> I fly a T310R
> Walker
> cramalot-inn
> 84fc35
> kcmo
>
>
>
>
> Get trade secrets for amazing burgers. Watch "Cooking with Tyler
> Florence" on AOL Food.
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Altimeter repair - Bob Lawrence - 06-04-2008, 12:14
Altimeter repair - Marv & Jean - 06-04-2008, 12:19
Altimeter repair - Dave Erickson - 06-04-2008, 12:42
Altimeter repair - Bob Lawrence - 06-04-2008, 13:06
Altimeter repair - Pete Masterson - 06-04-2008, 14:07
Altimeter repair - erniecarpet@... - 06-05-2008, 08:26
Altimeter repair - erniecarpet@... - 06-05-2008, 08:28
Altimeter repair - erniecarpet@... - 06-05-2008, 08:33
Altimeter repair - erniecarpet@... - 06-05-2008, 09:18
Altimeter repair - Bob Lawrence - 06-05-2008, 11:37
Altimeter repair - Leroy Eckert - 06-05-2008, 12:07
Altimeter repair - Don Bradner - 06-05-2008, 12:19
Altimeter repair - Leroy Eckert - 06-05-2008, 12:28
Altimeter repair - Leroy Eckert - 06-05-2008, 12:30
Altimeter repair - Richard Gideon - 06-05-2008, 12:31
Altimeter repair - Leroy Eckert - 06-05-2008, 12:39
Altimeter repair - Leroy Eckert - 06-05-2008, 12:46
Altimeter repair - Richard Gideon - 06-05-2008, 12:47
Altimeter repair - Pete Masterson - 06-05-2008, 12:58
Altimeter repair - Pete Masterson - 06-05-2008, 13:01
Altimeter repair - Pete Masterson - 06-05-2008, 13:03
Altimeter repair - Richard Gideon - 06-05-2008, 13:07
Altimeter repair - Richard Gideon - 06-05-2008, 13:18
Altimeter repair - Leroy Eckert - 06-05-2008, 13:32
Altimeter repair - Leroy Eckert - 06-05-2008, 13:36
Altimeter repair - Hisham Amaral - 06-05-2008, 13:41
Altimeter repair - Pete Masterson - 06-05-2008, 17:08
Altimeter repair - Pete Masterson - 06-05-2008, 17:21
Altimeter repair - Pete Masterson - 06-05-2008, 17:27
Altimeter repair - Steve Pfiffner - 06-06-2008, 01:16
Altimeter repair - Leroy Eckert - 06-06-2008, 01:27
Altimeter repair - Leroy Eckert - 06-06-2008, 01:31
Altimeter repair - dwalks@... - 06-06-2008, 06:11
Altimeter repair - brad barton - 06-06-2008, 10:54
Altimeter repair - Pete Masterson - 06-06-2008 16:11



User(s) browsing this thread: 1 Guest(s)