Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dump Valve Rebuild?
02-27-2007, 12:42
Post: #5
Dump Valve Rebuild?
Now that there is a discussion of dump valves ... and you mention the
&^%^&% air valves ...

I really hate having to 'air up' the coach just to dump, especially
when I'm in an RV park for a week or so. It seems so silly to run a
500 hp engine just to get the air pressure to dump the sewage.

So, does anybody know if
1. is it practical to re-route the air valve source to the auxiliary
compressor (used to provide air to the Microphor toilet) -- and will
that compressor be able to provide enough air to efficiently operate
the air valves without stressing the compressor, or
2. what are some of the alternatives (and costs + ease of
installation). Are electric valves a good idea? I certainly don't
really want to hassle with manual valves... the switches are close
enough to the sewage as it is...

When in an RV park, I usually go 3 days between dumps or I dump on
the day we leave... It's not like I do it all the time, but I have
noticed a few strange looks from neighbors after I've 'aired up' to
do a dump.

Pete Masterson
aeonix1@...
'95 Blue Bird Wanderlodge WBDA 42'
El Sobrante, CA




On Feb 27, 2007, at 1:34 PM, Terry Neal wrote:

> Keith, you should contact Jeff Miller at Dupree Products
> (616.355.9811). He owns Dupree now & has the valves in stock as
> well as
> all the rebuild parts. Also,. you can upgrade to air valves if that
> interests you? The bodies are glued into the tank adapter. If you
> get
> lucky, the adapter that screws into the tank will turn out easily. If
> not, you have the cut the fitting out of the tank & glue a new one in.
>
> Terry Neal
> Bozeman, MT
> 82PT40 6V92TA
> 74FC34 6V53T
>
>
> Keith Strehle wrote:
>
>> The next item on the list is the dump valves. They are the twist lock
>> type and appear to be original equipment. The look just like the
>> Dupree
>> valves? Are there knockoffs out there? Are the valve bodies glued in?
>> If they are Dupree valves, should I rebuild or replace the gate
>> assembly?
>>
>> Thanks, Keith
>>



[Non-text portions of this message have been removed]
Quote this message in a reply
Post Reply 


Messages In This Thread
Dump Valve Rebuild? - Keith Strehle - 02-27-2007, 09:16
Dump Valve Rebuild? - Terry Neal - 02-27-2007, 09:34
Dump Valve Rebuild? - Keith Strehle - 02-27-2007, 09:48
Dump Valve Rebuild? - Terry Neal - 02-27-2007, 10:33
Dump Valve Rebuild? - Pete Masterson - 02-27-2007 12:42
Dump Valve Rebuild? - Don Bradner - 02-27-2007, 13:07
Dump Valve Rebuild? - mbulriss - 02-27-2007, 13:12
Dump Valve Rebuild? - Terry Neal - 02-27-2007, 13:15
Dump Valve Rebuild? - Pete Masterson - 02-27-2007, 13:27
Dump Valve Rebuild? - Wilhelmus Schreurs - 02-27-2007, 13:44
Dump Valve Rebuild? - Gregory OConnor - 02-27-2007, 13:52
Dump Valve Rebuild? - ernieekberg@...> - 02-27-2007, 13:59
Dump Valve Rebuild? - Gregory OConnor - 02-27-2007, 14:00
Dump Valve Rebuild? - Pete Masterson - 02-27-2007, 14:17
Dump Valve Rebuild? - Don Bradner - 02-27-2007, 14:18
Dump Valve Rebuild? - Pete Masterson - 02-27-2007, 14:24
Dump Valve Rebuild? - Robert Britton - 02-27-2007, 14:25
Dump Valve Rebuild? - Terry Neal - 02-27-2007, 14:31
Dump Valve Rebuild? - Terry Neal - 02-27-2007, 14:34
Dump Valve Rebuild? - Curt Sprenger - 02-27-2007, 14:37
Dump Valve Rebuild? - ernieekberg@...> - 02-27-2007, 15:22
Dump Valve Rebuild? - Henry Jay Hannigan - 02-27-2007, 15:35
Dump Valve Rebuild? - Gregory OConnor - 02-27-2007, 16:46
Dump Valve Rebuild? - Tom McCarthy - 02-27-2007, 17:42
Dump Valve Rebuild? - Bob & Carol Howald` - 02-28-2007, 01:49
Dump Valve Rebuild? - ronmarabito2002 - 02-28-2007, 04:02
Dump Valve Rebuild? - Gregory OConnor - 02-28-2007, 04:25
Dump Valve Rebuild? - Pete Masterson - 02-28-2007, 06:44
Dump Valve Rebuild? - g_man1146 - 02-28-2007, 06:57
Dump Valve Rebuild? - Pete Masterson - 02-28-2007, 06:59
Dump Valve Rebuild? - Leroy Eckert - 02-28-2007, 12:50
Dump Valve Rebuild? - Gregory OConnor - 02-28-2007, 18:19
Dump Valve Rebuild? - Tom McCarthy - 02-28-2007, 19:20



User(s) browsing this thread: 1 Guest(s)