[Fwd: Air Regulator - Microphor Toilet]

[Curt Sprenger]

I'll do that in the morning. Thanks.

Curt Sprenger 1987 PT38 8V92, Anaheim Hills, Calif.



David Brady wrote:

>Curt,
>
>I had the same problem with my $20.00 Clippard air pressure
>regulator, so I bought a new one from Clippard. Within 2 weeks
>the new one exhibited the same symptoms. I called Clippard and
>was told that I could try dripping a few drops of air compressor
>tool oil into the top of the regulator - it's been working properly
>ever since.
>
>David B
>'02 LXi, Smokey
>Va
>
>Curt Sprenger wrote:
>
>
>>The Microphor $290.00 toilet air pressure regulator ended up no cost to
>>me. Not from Microphor.
>>
>>I contacted the local Clippard store. The 60 - 65 PSI regulator had a
>>build date out 10 days and then shipping days. I said I'd take it. The
>>gal asked how many and I said one. She said come on down and I'll give
>>you a test sample of the 0 - 100 PSI regulator.
>>
>>I set the regulator adjustment toward the high end, installed the
>>regulator, started the compressor, and kept tapping the flush handle
>>until the toilet flushed, then backed off the regulator to a lower
>>pressure that would not flush, then turned it up slightly, and all is good.
>>
>>Microphor sent me a PDF document for the LF-210 model, 16 pages. Let me
>>know if you need a copy and I'll forward it to you.
>>
>>
>>
>>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>