Ride Height

[mbrund]

Like Steve, I have repeated this process quite a few times over the
last several weeks since I noticed it shortly after purchasing the
coach. And in each case, the same thing occurs, just as Steve has
explained it. The drive axle bags are full and hard before the tags
are brought up as I have verified several times over the last month
or so.

Michael Brundridge
1992 WB40
Georgetown, Tx


--- In WanderlodgeForum@yahoogroups.com, "smquandt"
wrote:
>
> Don
>
> I just repeated the following and against my better judgement
stuck
> my head under the coach to be sure that the rears were not
inflated
> when the suspension switch only was on starting at a 100% dump:
>
> 1. Air up suspension only, front comes up, rear moves small
> amount, similar to Mike's measurement
>
> 2. Air up tags, rear goes to ride height.
>
> 3. Dump tags, rear goes down about 1" from ride height with all
> weight on drives only.
>
> 4. Dump suspension coach goes to bottom.
>
> 5. Got to #1 to repeat test
>
> Rears definitley are not inflating until the TAG switch is turned
on!
>
> Steve Quandt
> 1993 PT-40
> Iron Mountain, MI
>
>