Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EXTERIOR_PAINT_PROTECTION
02-04-2014, 21:50
Post: #3
RE: EXTERIOR_PAINT_PROTECTION
(02-04-2014 19:52)timetravelers Wrote:  Update from my post of 2009. I had the front repainted at CoachWorx in 2010. I took the 3M off by hand with solvent and scrapers before painting. It was a horrible job and I didn't really save any money on the repaint.

After I got my first stone chip, I decided to find a new film (didn't want to deal with a Bra) and discovered Diamondshield with it's lifetime warranty.

There was still some 3M below the bumper, so I asked if the installer could remove it. He got out his Wagner wallpaper Power Steamer #705 from the Depot. He used ScrapeRite plastic blades, hit the 3M with steamer, lifted the edge with a blade and pulled the 3M off slowly in one piece!!!!!!!!!!!!!!!!!!!!! It didn't hurt the paint one bit.
__________________

There are also liquid protectorates that can be sprayed on instead of sticking the vinyl sections on. I found the vinyl deteriorates over time. Removing it is a major hassle and chore. I used Amor Coat sprayed on over the front bumper to top above the windshield to protect the entire leading surface from incoming. It looks great and holds up like a clear coat but repels objects from marring the paint.

Tommy "2 Shoes" McCarthy
2006 M450XLI "GoneAway" Big Grin
Former owner 1995 PT42 WB "Pretty Penny"
Gardnerville, NV
Near South Lake Tahoe
Find all posts by this user
Like Post Quote this message in a reply
Post Reply 


Messages In This Thread
RE: EXTERIOR_PAINT_PROTECTION - tcandt - 02-04-2014 21:50



User(s) browsing this thread: 1 Guest(s)