Roof walkways

[Rob Robinson]

Brian I have done a couple of these roofs. I've mentioned my method a couple of
times on the net so you should be able to find one of my old posts on it. If
not send me your phone number ( rrob at telus dot net)and a time and I'll give
you a call.

Rob, Sue & Merlin
94 WLWB


Quoting Brian Gatley :

>
>
>
>
> Many of the screw heads for the screws securing the walkways on the roof
>
> are rusting. Does anyone have any recommendations for replacing these
>
> screws?
>
>
>
> 1. Don't do it unless I am willing to pull everything off, installing
>
> new rubber "runners" and completely redoing the installation of the
>
> walkways?
>
>
>
> 2. Go ahead and replace the screws only with stainless screws and
>
> sealant?
>
>
>
> 3. Modify the installation in some way because once the screws are
>
> removed there is no way of getting them back in the same holes?
>
>
>
> I'm being a little extreme with my options because I want to be sure I
>
> do this right if I do anything.
>
>
>
> Any suggestions would be helpful.
>
>
>
> Brian Gatley
>
> 93 WLWB PT40
>
> Bend, OR
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
> SPONSORED LINKS
>
>
>
>
> Recreational vehicles
>
>
> Wanderlodge
>
>
> Automotive maintenance
>
>
>
>
> Recreational vehicle dealer
>
>
> Used recreational vehicles
>
>
> Automotive radiators
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> YAHOO! GROUPS LINKS
>
>
>
>
> Visit your group "WanderlodgeForum" on the web.
>
> To unsubscribe from this group, send an email to:
> WanderlodgeForum-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>