Alternative to VMSPC
|
03-02-2013, 12:00
(This post was last modified: 03-02-2013 12:01 by pgchin.)
Post: #17
|
|||
|
|||
RE: Alternative to VMSPC
Ray,
I was able to get to the bus yesterday so attached please find pictures of the connector. I also have a set of blueprints for the bird I obtained from the factory so here is the data: 1) It's a Deustch Diagnostic connector PN HD10-6-96P 2) Diagnostic Pins (4 wires used) B-goes to c1 on the ECM connector A- goes to c2 on the ECM connector C- goes to b3 on the ECM connector E- black ground goes to black ground in the power harness connector The prints also have an annotation noted saying that Diagnostic connector was a Detroit Diesel part # and harness DD part number ddc23513052. It appears they used a standard DD part so it should be the same as the Prevosts if they also used a standard DD part. I know that connector works as I have printouts from DD, 1 image I already attached above. However the ground pin appears to be more recessed than the other 3 pins in the diagnostic connector ( see pic 3). Is yours like that also? Thanks! Pete and Donna Chin 95 42' WLWB On The Road Always! :-) " We'll raise up our glasses against evil forces singing, Whiskey for my men, and beer for my horses!"-Toby Keith & Willie Nelson - The bridge from Toby Keith's title album track "beer for my horses" |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)