Interesting Numbers

[freewill2008]

The reman starter for my 3208 came with a test results sheet that has some
interesting info:

The max output for this Delco 40MT starter is 5KW or around 6HP, and about 35FP
of torque.

To produce the full 6HP it draws around 1200 amps.

The solenoid draws 80 amps to pull in and 16 amps to hold.

The starter is apparently designed to run at 1500RPM. If it gets loaded down to
750RPM the amp draw increases to around 1700 while producing only 5HP.

Clearly the 3208 does not need 6HP/1200 amps to start because mine will start
fine with a cranking battery rated at only 650 cold cranking amps. The battery
I normally use is rated at 950 CCA.

For those who just HAD to know

Bob Griesel '84 FC31 WLII WA