Driving Lights-wiring

[Curt Sprenger]

Don,

The Schematic is heading your way.

Curt Sprenger

1987 PT38 8V92 "MacAttack Racing"

Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.

"Host of the Annual Bluebird Quartzsite Rally"

On Wed, Apr 8, 2009 at 4:49 PM, Donald Spithaler <"dspithaler@gmail.com"> wrote:

Hi Curt      Can you send the BB Schematic to me?     Thanks
Don Spithaler
89 SP 36'               
Butler, PA
"dspithaler@gmail.com"

On Wed, Apr 8, 2009 at 6:11 PM, Curt Sprenger <"curtsprenger@gmail.com"> wrote:

Robert,

I sent to you a BB schematic that should help you.

Curt Sprenger

1987 PT38 8V92 "MacAttack Racing"

Anaheim Hills, CA
Read all about Southwest Bluebirds and Friends (SWBB) at http://www.SOUTHWEST-BLUEBIRDS.ORG ...Then Join us.

"Host of the Annual Bluebird Quartzsite Rally"

On Wed, Apr 8, 2009 at 1:40 PM, rssdmc <"robert@savage-family.com"> wrote:

I am trying to rewire driving lights so that they will work without

being tied to the high beams. I have disconnected the orange wire found on the high beam post and connected it to an independent switched positive terminal. I am now having problems with the driving light air switch on the transmission console and the air "controller" or solinoid in the front of the dash. I know that wire # 3 goes between the air switch and the driving light switch on the transmission console. What I don't know is where the red wire from the air switch goes and the # 11 wire from the driving lights switch on the console goes. Can anyone help??

Thank you

Robert and Dianne

Robert=the repairer

Dianne=now that you fixed that what about the other 10 projects?



Forgot to mention this is a 1987FC Wanderlodge