Xantrex 2.0 Hardware Inverter/Charger

[Joe Garner]

There is a tech note on the Xantrex site re this...

http://www.xantrex.com/web/id/41/p/docs/...roduct.asp

/Joe

Don Bradner wrote:
>
>
> I don't know what happened. Transfer shouldn't have been doing anything.
> The Prosine docs define the error as an internal one; there are three
> relays internally that isolate the output of the inverter from the
> supply line, and one of those is welded shut.
>
> On 8/24/2008 at 8:49 PM Chuck Wheeler wrote:
>
> >Full load shouldn't trip the 50 amp breaker. From your error it sounds
> >like
> >the transfer relay contacts stuck and got circuits crossed up.
> >
> >- Chuck Wheeler-
> >FC 31SB Fort Worth TX
> >
> >