Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Newbie Issues...Engine Bay Cool Down Methods
09-11-2007, 11:30
Post: #7
Newbie Issues...Engine Bay Cool Down Methods
A few of us here in Texas have installed 12V electric radiator fans on
the passenger side of the engine compartment, blowing back over the
engine and through the radiator to aid in the cooldown of that area.
It really helps a lot. I installed a switch next to the fan that I
turn on when I shut the engine off. I let it run for 15 to 30 minutes
after shutdown.

R.E. (Ron) Marabito, Dallas, TX 92WB40


--- In WanderlodgeForum@yahoogroups.com, "Allen & Conny"
wrote:
>
> We just took our 43' LXi out for our first shake down cruise to Ft.
> Desoto Park in St. Pete, Florida. Aside from the Ranger sending to a
> spot we had no prayer of getting into, we had an issue of cooling down
> the bedroom of the coach. Granted, it was 94 degrees with 100%
> humidity, but the bedroom seemed to take hours and hours to cool down
> with all the heat of the engine bay trapped directly below the bed.
>
> What is the best way to vent the engine bay of all that heat? What
> did the dealer not tell me? Any help would be greatly appreciated!
>
> Thanks!
>
> -Allen and Conny
> '00 43' LXi
> "Lone Wolf"
>
Quote this message in a reply
Post Reply 


Messages In This Thread
Newbie Issues...Engine Bay Cool Down Methods - Allen & Conny - 09-11-2007, 09:19
Newbie Issues...Engine Bay Cool Down Methods - Leroy Eckert - 09-11-2007, 09:26
Newbie Issues...Engine Bay Cool Down Methods - Jack and Liz Pearce - 09-11-2007, 10:58
Newbie Issues...Engine Bay Cool Down Methods - Jack and Liz Pearce - 09-11-2007, 11:01
Newbie Issues...Engine Bay Cool Down Methods - brad barton - 09-11-2007, 11:01
Newbie Issues...Engine Bay Cool Down Methods - Leroy Eckert - 09-11-2007, 11:27
Newbie Issues...Engine Bay Cool Down Methods - ronmarabito2002 - 09-11-2007 11:30
Newbie Issues...Engine Bay Cool Down Methods - Bob & Carol Howald` - 09-11-2007, 11:50
Newbie Issues...Engine Bay Cool Down Methods - Leroy Eckert - 09-11-2007, 11:53
Newbie Issues...Engine Bay Cool Down Methods - DONALD BROWN - 09-11-2007, 11:53
Newbie Issues...Engine Bay Cool Down Methods - Leroy Eckert - 09-11-2007, 12:11
Newbie Issues...Engine Bay Cool Down Methods - Fred Hulse - 09-11-2007, 12:26
Newbie Issues...Engine Bay Cool Down Methods - Allen & Conny - 09-11-2007, 13:43
Newbie Issues...Engine Bay Cool Down Methods - Allen & Conny - 09-11-2007, 13:43
Newbie Issues...Engine Bay Cool Down Methods - Bob Lawrence - 09-11-2007, 15:22
Newbie Issues...Engine Bay Cool Down Methods - Gregory OConnor - 09-11-2007, 17:10
Newbie Issues...Engine Bay Cool Down Methods - Allen & Conny - 09-12-2007, 02:53
Newbie Issues...Engine Bay Cool Down Methods - Don Bradner - 09-12-2007, 02:59
Newbie Issues...Engine Bay Cool Down Methods - Allen & Conny - 09-12-2007, 03:28
Newbie Issues...Engine Bay Cool Down Methods - Larry Watson - 09-12-2007, 10:12
Newbie Issues...Engine Bay Cool Down Methods - Jack and Liz Pearce - 09-12-2007, 15:09



User(s) browsing this thread: 1 Guest(s)