Toilet emergency...Help!

[Don Bradner]

On 9/2/2007 at 1:01 AM Scott Forman wrote:

>Still need to know how to fix it.

Did you see the link to the manual and the steps to fix I posted? Repeated
below.

The manual has diagrams, but you might not need them. I don't think I would
attempt it without removing the toilet - rock it up and out to avoid destroying
the wax ring, or get a new ring.


The troubleshooting in the microphor manual at
http://www.microphor.com/pdf/LF-220_Manual.pdf says "Water continues to
run. Obstruction in water Solenoid Valve. Remove and inspect Solenoid Valve -
see Solenoid Valve Cleaning" The latter section says:

Solenoid Valve Cleaning
1 Disconnect the power by removing the two blue wires from the solenoid.
2 Disconnect the water supply line at china end.
3 Remove two screws securing the solenoid to the mounting bracket.
4 Pull solenoid away from the Vacuum Breaker.
5 Remove water supply tube.
6 Remove four (4) screws from Solenoid Valve Body and remove spring and
diaphragm.
7 Clean holes in the diaphragm if clogged. Inspect solenoid for debris and
clean. Reassemble in reverse order.

Don Bradner
90 PT40 "Blue Thunder"
Eureka, CA