Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
BB Clock Reproductions
05-23-2007, 03:17
Post: #4
BB Clock Reproductions
You are absolutely right Tom. It would be very hard to find a piece
of walnut thick enough to do the job. I'm willing to bet the walnut
used to make the existing original clocks was laminated. Back in the
day I used to buy a lot of wood. I mean A LOT of wood for the U.S.
Navy Submarine Base out there in Goose Creek? Cooper River...

An industrial drum sander would make the job much easier but there
will still be a lot of hand sanding to do.

I'm surprised there were no takers on the acrylic idea? Once you
have the acrylic blank you can make it any color you want, ghost
flames and all...

Keith
84FC35


--- In WanderlodgeForum@yahoogroups.com, Tom Meservey <snulli2@...>
wrote:
>
> The clock in my '81 is walnut. Scott Bishop (who I thought might
have weighted in) and I looked at the feasibility of making them, and
here is what I (we) came up with. I ran it by OB, the cabinet making
I studied under at the wood shop on the AFB and here are the things
we came up with. 2" walnut, if you can get it is moderately
expensive and cannot be had everywhere. To cut that thick of a piece
of walnut, you will need a GOOD band saw. In my limited experience
of cutting anything with a band saw, you leave "saw marks" on the
edge of the wood. These will either have to be 1) filed or 2)
sanded, preferably both. If you don't have a ridgid up and down
sander, this is going to be time consuming to do by hand. Trust me,
walnut is not like sanding pine. All 'n all, we figured materials
wise, one could be made for about $50.00. That is provided you have
all the right equipment. However, labor wise, I didn't think I
wanted to get involved in "mass producing" them. Too
> labor intensive. It would be a good hobby item to make one or
two, but I don't think I could make a living making them and selling
them. BTW be sure to cut the outline 1/16th inch larger all the way
around to allow for sanding.
>
> Keith, I apologize for NOT getting back to you and sending you a
pattern. It has not been a fun year.
>
> Tom Meservey, USN (Ret)
>
>
> ---------------------------------
> Expecting? Get great news right away with email Auto-Check.
> Try the Yahoo! Mail Beta.
>
> [Non-text portions of this message have been removed]
>
Quote this message in a reply
Post Reply 


Messages In This Thread
BB Clock Reproductions - Curt Sprenger - 05-22-2007, 05:31
BB Clock Reproductions - Tom Meservey - 05-22-2007, 12:29
BB Clock Reproductions - Curt Sprenger - 05-22-2007, 14:04
BB Clock Reproductions - Keith Strehle - 05-23-2007 03:17



User(s) browsing this thread: 2 Guest(s)