propane injection

[Mike Hohnstein]

That's right, need a robust turbo. At the time I tried propane the toter had a
Switzer turbo, like the 300 hp arrangement uses, only showed 12 #s boost. Since
then I got a trick unit that shows 16 #s, need to try the propane again this
summer in the rockies with more air pump. Mebbe it will show me sumthin.
MH
----- Original Message -----
From: Gardner Yeaw
To: WanderlodgeForum@yahoogroups.com
Sent: Thursday, March 22, 2007 6:53 PM
Subject: [WanderlodgeForum] Re: propane injection


One thing I have learned from reading up on it is that propane
injection is of little use on a non-turbo engine. If anyone has a
differing opinion I would like to hear it, but for now, I think my
NA 3208 is not a good candidate for propane injection.

Gardner
78FC33

--- In WanderlodgeForum@yahoogroups.com, "worktohobby"
wrote:
>
> Hello,
>
> On my old 1980 Bluebird the propaine helped with off the line
> performance allot, some what in the mid-range, and little at near
> governed spead; because the governor would compensate for the
> additional (propane) fueling. This was a mild injection system,
> the "Fuel Mizer".
>
> What made a huge differance was a new free flowing muffler,
stainless
> steel. Actually quieter at the front of the bus, no louder at the
rear.
> This actually made the bus quite drivable in traffic and the bus
ran
> cooler as well. This was the type of exhaust that you could
actually
> see through from end to end, and about half the size of the OEM
> muffler. Do this mod before you play with the propain.
>
> Regards,
>
> Don Duncan
> 1987 PT40, 8V92
> Beaverton, Oregon
>





[Non-text portions of this message have been removed]