RCA back-up camera

[Tim Hannink]

The camera system uses a standard composite video signal - get a BNC
to RCA adapter, connect the adapter to the camera and run a RCA
cable to any TV using one of the yellow input terminals. When you
get to the right channel on TV (usually the AUX input) you should
see your camera video if it is working correctly.

If you replace the front monitor you can use the stock coax cable
and the RCA adapter into the new monitor.

Good luck,

TJ Hannink
1981 FC-33SB
Full-timing in Paradis, LA
Camping this weekend at Tickfaw SP just south of the I-12 and I-55
junction.



--- In WanderlodgeForum@yahoogroups.com, "Keith Strehle"
wrote:
>
> I know there is power to the terminals but it does not work. So I
want
> to take my (original equipment?)RCA back-up camera out to have it
> tested or to determine if it's worth fixing. Any suggestions?
>
> Keith
> 84FC35
> San Diego
>