Dump Valve Rebuild?

[Keith Strehle]

Will the adapter turn independent of the valve and piping? Like a
pipe union fitting?

--- In WanderlodgeForum@yahoogroups.com, Terry Neal wrote:
>
> Keith, you should contact Jeff Miller at Dupree Products
> (616.355.9811). He owns Dupree now & has the valves in stock as
well as
> all the rebuild parts. Also,. you can upgrade to air valves if
that
> interests you? The bodies are glued into the tank adapter. If you
get
> lucky, the adapter that screws into the tank will turn out easily.
If
> not, you have the cut the fitting out of the tank & glue a new one
in.
>
> Terry Neal
> Bozeman, MT
> 82PT40 6V92TA
> 74FC34 6V53T
>
>
> Keith Strehle wrote:
>
> > The next item on the list is the dump valves. They are the twist
lock
> > type and appear to be original equipment. The look just like the
Dupree
> > valves? Are there knockoffs out there? Are the valve bodies glued
in?
> > If they are Dupree valves, should I rebuild or replace the gate
> > assembly?
> >
> > Thanks, Keith
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>