Cruise Control???

[Jeff Miller]

If it's an '80-'83 FC it should have a vacuum-actuator for the cruise
control mounted to the rearmost bolts for the intake manifold,
driver's side.

- Jeff Miller


--- In WanderlodgeForum@yahoogroups.com, "davidkerryedwards"
wrote:
>
> Yes, I believe that is the throttle cruise connection. On mine it
goes from the actuator to
> the throttle linkage. Do you have an actuator in place? My vacuum
generator failed and I
> decided it to replace the vacuum system with an electric version
since the vacuum system
> did not work that well anyway.
>
> Kerry
> 82 Fc 35
> Denver
>
> --- In WanderlodgeForum@yahoogroups.com, "doug_ngl"
wrote:
> >
> > Hey Gang, Happy T-Day! Nothing like a day of BB chores. I think I
have
> > a handle on my water problems, looks like a bad regulator/check
valve
> > and a seeping Sporlan letting the water run in a loop instead of
> > building pressure when using the pump. Gonna look for parts
tomorrow.
> > The cruise does not work on our rig, so we used the hand
throttle on
> > the way home, kinda scary in traffic . While adjusting the
throttle
> > linkage, I saw a heavy gauage beaded chain laying in the valley
under
> > the air plentum. I pulled gently on the chain (it was not
attatched to
> > anything) and it came loose, bringing a short, light, broken
cable
> > with
> > it. Is this the throttle/cruise connection? If so, where does it
hook
> > up, is there some bellcrank assy that I am missing? Any light
that
> > could be shed on the cruise control assy would be greatly
appreciated.
> > Thanks as always. Doug
> >
>